The hold button on my 2004 Suzuki Verona comes on out of no where flashing and it stops my car from excelerating. I haveto pull over and shut the car off then on in order to contiue driving. After 2k dollars in reapirs over the last 3 months...I just want to know if this feature can be disconnected???? I don't need it. Thanks

SOURCE: 2004 Suzuki Verona

There is not a fuse for the check engine light.

Dave C

• 1050 Answers
• Posted on May 10, 2009

SOURCE: 2004 suzuki verona..where is bank 1 senor 1 located on the engine

This car has a transversely mounted straight six I believe, which is really unusual, but that means it only has one bank, so "bank 1, sensor 1" will be the upstream O2 sensor (between the engine and the cat) and "bank1, sensor 2" will be the downstream sensor (behind the cat).

SOURCE: misfire code on #3 cyl. 2004 Suzuki Verona

I had the same problem I disconnected the battery to reset computer when I was changing my plugs & ignition wires! hope this helps

SOURCE: Check Engine light reset on 2004 Suzuki Verona

You can disconnect the negative cable of the battery for a couple of minutes (but you will lose radio settings and possibly others that the car will relearn), or you can go to an auto parts store such as Advance Auto or Pep Boys and they have a free scanner service to diagnose problems that should be able to reset the light. Mine does.

SOURCE: Where is the turn signal fuse located in a 04 Suzuki Verona

it is located in the fuse box the one that is inside the vehicle.