- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
so did not check all fuses first? and IS.
can you be more clear, what works and does not work?
electrics failures, we need all that works to
not told does, car drive day or night.? (A#1purpose)
head lamps
brake lamps
parking
turns
radio works
heater dash blower works on high.
gauge back lamps you meant and are part of PARK. +dimmer.
and what does this mean.
dash lights
you mean the cluster waring lamps are dead
like doors open, CEL, brakes, oil, seats belts., etc, be clear .
we are blind here can not see your dash.
Look at the tail lamp, if there are two screws at the top and bottom, simply remove the screws. If not, you will need to open the rear doors and remove a section of the rear panel and access the bolts that hold the tail lamp in place.
open rear hatch and remove 3 screws down edge of lamp assembly gently pull assembly out and then you can remove globe sockets from lamp assembly to change globe
There are no screws need to be removed from the headlight bezel as the lamp need be only removed from the rear. On the rear of the headlight unplug the wiring harness, then turn the big hand screw /catch only 1/4 turn and pull out the socket and lamp straight out. then replace the burnt lamp and do the reverse of which you did to get it out.
hi fog light bulb accessed fro under wheel arch you will need to unscrew the engine under cover at front then drop it down enough to access the rear of lamp it will have a cover/wire plug/socket that you will see ? pull these of to reveal the bulb which is normally held in place by a sping clip which hooks in place around bulb the bulb may or may not have a wire fixed to bulb ? reassemble in reverse make sure bulb fitted is working b4 you refix under panel
×