1345 is cam and crank sensor correlation its mainly the cam sensor going out, also the delay start that also trigger a camsensor code they call it excessive crank time check the fuel pressure that is capable of setting a cam code (1345) If fuel pressure is good (55-60 psi) expect to replace the camsensor you might as well do the crank sensor heres a nightmare on this code it can set if the distributor is off one tooth and yes these distributor have high failure rate
I checked my shop manual and the proper code identification for a P1345 is "Crankshaft position sensor / Camshaft position sensor correlation". Same code for both and it either is malfunctioning or needs adjustment.
2,167 views
Usually answered in minutes!
oh and does the distributor suppose to have a little slack??
Mandy, I can help you. Call my shop at (619)262-4402, ask for Liem
×