2002 Ford Escape left rear door will not open due to electric lock handle moved manually, would not reset, door open handle cable ok. Need to get panel off or recommend. If door panel needs removing, then how?

There are several possible causes for a rear sliding door that won't open on a Ford Grand C-Max, including a malfunctioning latch, a broken cable, or a damaged handle. Here are some steps you can try to open the door:

1. Try using the interior or exterior handle: If the handle feels loose or doesn't move smoothly, it could indicate a problem with the latch or cable. If the handle feels normal but the door won't open, move on to step 2.
2. Check the child lock: Make sure the child lock on the door is not engaged, as this can prevent the door from opening from the inside. The child lock is usually located on the edge of the door, near the latch.
3. Use the key fob: Press the unlock button on your key fob to see if the door will unlock and open. If it doesn't, move on to step 4.
4. Check the fuse: Look for the fuse box on your Ford Grand C-Max and locate the fuse for the power sliding door. Check the fuse to see if it's blown, and replace it if necessary.
5. Try manually unlocking the door: If all else fails, you can try manually unlocking the door by removing the door panel and accessing the latch mechanism. This can be a complicated process, so it may be best to take the vehicle to a professional mechanic or Ford dealer for assistance.

Overall, if you are not familiar with automotive repairs, it may be best to take the vehicle to a mechanic or Ford dealer to diagnose and repair the issue.

Fixed 1997 Ford Explorer Door wont open - YouTube

? 2:03
https://www.youtube.com/watch?v=Gs3eC8E-gbU
Sep 6, 2014 - Uploaded by craiwin
I fixed my 1997 Ford Explorer Door won't open problem! ... I have the same problem but my passenger side door on my 2001 Ford Explorer locked and won't open smh ... will this work for the rear passenger doors? ... How to Replace Rear Inside Door Handle Latch Cable 2002-05 Ford Explorer Mercury ...

98 Ford Explorer Door Won't Open Part 1 - YouTube

? 0:30
https://www.youtube.com/watch?v=oY4IcNdGK68
Apr 5, 2010 - Uploaded by gdellinger
A couple weeks ago the door handle just stopped working on the... 98 Ford Explorer Door Won't Open Part 1 ... The remote would open all other doors. ... on a Ford Exploer 91-2001 - Duration: 7:27. by diversity2 37,309 views.

98 Ford Explorer Door Problems- how to open without panel ...

? 4:22
https://www.youtube.com/watch?v=lJ0Fsh3561s
Jan 1, 2013 - Uploaded by inwinblades
98 Ford Explorer Door Problems- how to open without panel removal. inwinblades .... HELLO panel removal??? door won't open... Been searching all ... ok this better work on all doors, im aboutt o try this on my rear passenger door. .... I didn't care about the plastic door handle so i just "busted" it to pieces.

Rear doors can't open from inside - Ford Explorer and R

Most often is a bent or worn-out linkage between the handle(s) and the release. Try locating the linkage and forcing it with a screwdriver or plier. Once you get it to open you can re-adjust them somewhat. I had to replace the outside handles mine due to excessive wear.

Open the door manually with the key!

Many Ford Escapes have power door locks as standard equipment. This system consists of a lock switch, lock actuator and wiring harness. When you depress the lock switch, it sends an electronic signal through the harness to the actuator. The actuator moves an internal piston that either pulls the actuator hook down or pushes it up. The actuator hook connects to the lock rod, which either locks or unlocks the door, depending on which way you push the lock button. While this system won't work with a dead battery, the mechanical lock system remains unaffected by electrical power loss.

Insert the door lock key into the driver's door lock.
Turn the key counterclockwise one quarter turn.
Pull the door handle up until the Escape's door opens. Once the driver door is open, simply open the remaining doors by pulling the interior door handles until the doors open.

use a slim jim to unlock it

Did you try pulling the door handle? they normally over ride the lock, also a coat hanger will unlock it so yuo can get tothe door to fix.

please rate as solved if this is what you need. You will need to borrow a heavy duty riveter from autozone or wherever you buy the lock cylinder from.


Removal

1. NOTE: The rear door window glass must be completely raised.
   Disconnect the battery ground cable. For additional information, refer to Section 414-01 .

1. Remove the rear door trim panel. For additional information, refer to Section 501-05 .

Trim Panel —Rear Door, Expedition Removal

1. Remove the power window switchplate (14524).

1. Disconnect the electrical connector.

1. Remove the rear door handle trim cover.

1. Remove the rear inside door handle.
   • Remove the door handle bolt.

1. Remove the rear door trim panel screws at bottom of panel.

1. CAUTION: To avoid damage to the rear door trim panel, do not pull directly outward.
   Lift upward and then outward to remove the rear door trim panel (27406).

1. Remove the rear door watershield.

1. Disconnect the power door lock actuator electrical connector.

1. Drill out the power door lock actuator rivet.

1. Remove and discard the screws.

1. Remove the power door lock actuator.
   • Disconnect the power door lock actuator rod.

Installation

1. NOTE: Use new screws when installing the rear door latch.
   To install, reverse the removal procedure.
   • Use Heavy Duty Riveter to install the new rivet.

The liftgate consists of the following components:

• liftgate door lock actuator
• liftgate lock cylinder (if equipped)
• liftgate window glass
• liftgate window latch/ajar switch
• liftgate window glass release handle
• liftgate latch remote control which consists of the following component:
  • liftgate release handle
• liftgate latch, which consist of the following component:
  • liftgate latch door ajar switch

Liftgate Latch Actuator Removal and Installation

1. Remove the liftgate latch remote control. For additional information, refer to Liftgate Latch Remote Control in this section.

SECTION 501-14: Handles, Locks, Latches and Entry Systems 2001 Escape Workshop Manual
REMOVAL AND INSTALLATION Liftgate Latch Removal and Installation

1. Remove the liftgate trim panel.

1. Disconnect the liftgate ajar switch electrical connector.

1. Disconnect the liftgate latch actuating rod.
   1. Open the clip.
   1. Disconnect the actuating rod.

1. Remove and discard the liftgate latch bolts.

1. Remove the liftgate latch.

1. NOTE: Make sure the liftgate latch release rod is not preloading the latch. It should be clipped in a relaxed state with no slack.
   NOTE: Position the liftgate latch release rod by pushing outboard to remove the slack.
   

1. Remove the screws and the liftgate latch actuator

the unlock or popper for the door needs to be replaced. the door should work with a key.