How do i remove the overhead console on my 03 sedona. I have homelink and cant seem to locate any screws.
There are only two screws to contend with but they are behind the homelink module. To remove the homelink module you're going to use a butter knife. The blade on a butter knife is smooth and if you can find one without any teeth on it, all the better. Stick the knife into the gap between the homelink module and the left side of console housing and pry down on the homelink module. Repeat for the right side and the homelink module should pop out. Once it's out of the way, remove the two screws that hold the console housing to the roof. Now that those screws are removed all that remains is to grab ahold of the front of the console housing (edge toward the windshield) and pull straight down. It can be painful to do this part since you're inserting fingers into a tight space but remember to be gentle. There are two plastic ears on the housing that slide into slots (common trim panel anchors really) and I can see that it could be possible to break them off if one isn't careful.
Hope this helps.
804 views
Usually answered in minutes!
button stuck
×