It could be an adjustment issue for the release lever that removes the block that stops it from freely going into reverse or a transmission problem brewing. The lever you lift on the shifter before going into reverse connects to a cable that goes tot he transmission, if that cable is out of adjustment and isn't retracting the block properly then you will have problems getting into reverse. If you can get it to go into reverse by letting the clutch out and putting it in the reverse position then it is a clutch problem. The neon has a lot of bad press but that manual transmission is pretty dependable but does need periodic adjustment. For step by step troubleshooting and adjustment steps I recommend the Haynes or Chilton's Repair manual on the vehicle. Haynes is a little easier to follow in my opinion but Chilton's has a pretty good manual as well.
281 views
Usually answered in minutes!
×