Since you know that the clutch must engage in order for the compressor to operate, then there are most likely one of causes. The first is low or no freon in the system. The a/c system has a pressure sensor mounted in the low( return) side hose that prevents the clutch to engage if the freon is too low. The second would be the a/c fuse or relay faulty, preventing the clutch solenoid( a 12 volt electrically operated solenoid) from engaging. And the third would be that the clutch itself is bad because the solenoid wiring has broken. I suggest that first you locate the a/c clutch relay in the relay panel, remove the relay, carefully remove the plastic cover from the relay and reinstall the relay. The clutch should engage the compressor when you manually close the relay contact with your finger for one or two seconds. If the clutch does engage, your electrical circuit in ok and you are probably low on freon. A half of a can of r-134 in more that enough to operate the pressure switch. If it doesn't engage, check the a/c fuse or the clutch solenoid itself. Get back to me and let me know how things went. Dano
2,434 views
Usually answered in minutes!
×