Brake lights stays on
You need to adjust those nuts so that it goes out. Back it off, so that switch moves away from pedal. leave some clearance, very slight, between plunger & where it makes contact. Then tighten both nuts to keep it in place.Not too much clearance, just enough that lights go out.
my nissan altima has the same problem, i have checked all fuses, bulbs, and wiring that was accessible. i also checked the switch the brake pedal pushes on when u push the brakes, all checks out good but the brake lights stay on but the drive side brake lights wont come on period? any solutions would be greatly appreciated
I have the same problem. I found broken bits of plastic on the floor. But the button is being pushed in when the pedal is unpressed.
×