I need to replace the shocks/struts on my 2006 suzuki reno--what parts do I need in detail

SOURCE: shocks/struts on 94 mustang gt

no, just replaced mine, springs are independent of shocks and struts

SOURCE: Cabin Air Filter

good news is it can be changed with no tools in about 2 minutes. just take out the glove box and the cover comes off easy.

SOURCE: tire shop says tire wear is due to bad rear struts

you need to replace only the shock cartridges.  Also have the tires rebalanced.
When you receive advice from this website you have to understand that without the item in front of us, we are only able to provide "a best guess" as to what the problem might be based on you description of the defect.  If you haven't described a clear and precise description of the defect you decrease the chances of an accurate reply.  Thank you. 

Greg Bernett

• 2993 Answers
• Posted on May 13, 2009

SOURCE: replacing front struts

Okay....here is the steps first....and then the directions on how to use the tools:

1. Raise and properly support the vehicle.
2. Remove the front wheel.
3. Detach the shock absorber lower mount by removing the two bolts.
4. Remove the retainer nut, retainer, cushion and shock absorber.
5. Detach the cushion retainer from the shock absorber.
6. Compress the coil spring with a commercially available spring compressor.
7. Detach the stabilizer bar.
8. Support the upper suspension arm and steering knuckle securely.
9. Remove the cotter pin.
10. Loosen and remove the nut.
11. Using a ball joint removal tool, detach the lower ball joint from the lower control arm.
12. Loosen the suspension arm set bolt.
13. Remove the suspension arm set bolt nut.
14. Remove the nut from the strut bar front set bolt.
15. Pull out both set bolts.
16. Remove the lower suspension arm and coil spring. To install:
    
17. Installation is the reverse of removal. Note the following torque specifications:
    1. Strut bar front set bolt: 221 ft. lbs. (300 Nm)
    2. Lower suspension arm set bolt: 148 ft. lbs. (200 Nm)
    3. Lower ball joint nut: 80 ft. lbs. (110 Nm)
    4. Lug nuts: 83 ft. lbs. (110 Nm).

Marvin

• 85242 Answers
• Posted on May 20, 2009

SOURCE: Help with replacement struts/shocks BMW 328Ci

go to the link below and u will find instructional video of this job.

http://video.google.com/videosearch?hl=en&q=how+to+replace+shocks+and+struts&um=1&ie=UTF-8&ei=iWwUSubBOqfgsgPqpLXqDQ&sa=X&oi=video_result_group&resnum=4&ct=title#