At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
My malfuncton indicator light came on after I started my engine. I tried to back out of my driveway and the car continued moving forward. I tried this twice. I had the car towed and the dealer just called to say they could not find anything wrong with the car. They drove the car immediately after it arrived and the malfunction indicator light was not on. What should I try next? I have a 2006 300C Hemi
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
bernardsblog.blogspot.com/.../dodge-transmission-output-speed-sensor.h... Sep 8, 2009 - The code was straight forward - PO720 - Output Speed Sensor Circuit.... words but if you've never seen the underside of a 1999 Dodge Ram 1500 pickup ...My 99 Dodge 2500 Ram won't accelerate..transmission is NOT ... RR - If the engine revs but the vehicle doesn't speed up then the trans is slipping.
with the key on/engine off floor the gas pedal 3 times the hold it down till the change oil light start blinking and go away,some times it take more than 10 sec,if it didn't work try it again,some times you have to try few times,to get it done
This means that yoy need to have the TCM (transmission control module) tested. P0700 is just the engine control computer alerting you to the fact a fault code is stored in the TCM.
the pipe on the fuel pump has perished by the sound of it,remove the sender unit with the pump built in ,look under the back seat for the inspection cover
dear friend:if the vehicle runs ok then it was just a freak appearance and if the engine light is still on then disconnect the battery for a short while and reconnect,the light should go off if not take it to a dealership to read the codes.
Hi There,
I just wrote and now that I got your second message this is exactly how the faulty coil pak acts.
The car will get you from point A to point B but when you get back in the car and try to start it, it just cranks over. But wait awhile and it will start again! For $50.00 try a new coil pak, chances are this just might solve the problem. And by the way, your check engine light is not connected to the coil pak, that is usually an emissions problem and you can deal with that later. Please let me know if this helps you and thank you for using FixYa!
Bad Differential or LR- brake caliper is locking up very bad. I am leaning more towards bad differential-(rear end) Take off differential cover and look inside gear may be broken. Contact if you need more help. thanks for using FIX YA
×