This 2008 sprinter has two belts, one for the fan only and the long belt,the engine is 3.0 diesel. How can i get the serpentine belt diagram

well it did not fall off
so pencil and paper draw out yours.
takes 5min work, no service manual to buy.
it depends on what 3 engines is there now.

seen here. (USA only car) exports ive no clue.

hi Robert.
this link will show you some diagrams might help you out.
Belt diagram for 2008 pacifica 3 8 serpentine routing Google Search
or this might help you as well.
Belt diagram for 2008 pacifica 3 8 serpentine routing Google Search

VIDEO Change Serpentine Poly Drive Belt tensioner on Mercedes Benz...

Serpentine Belt Replacement

Replacing Your Mercedes Belt Tensioner

mercedes benz serpentine belt diagram

Timing belt routing diagrams for cars and trucks? Click the link below:--- http://technoanswers.blogspot.com/2011/10/timing-belt-routing-diagrams-for-cars.html

Drive belt routing diagrams for cars and trucks? Click this link below:--- http://technoanswers.blogspot.com/2011/10/drive-belt-routing-diagrams-for-cars.html

The serpentine belt routing diagram for a 2000 Mercedes-Benz Sprinter 208 CDI, 2.2 liter, 60 kW (82 BHP) OM 611.987 engine code:

1. Without A/C (Air Conditioning) system:



2. With A/C (Air Conditioning) system:



Please do rate my response. Thanks!

Fig. Accessory serpentine belt routing-4.3L, 5.0L and 5.7L engines without A/C




Fig. Accessory serpentine belt routing-4.3L, 5.0L and 5.7L engines with A/C

Fig. Accessory serpentine belt routing-6.5L Diesel engines

Fig. Accessory serpentine belt routing-6.6L Diesel engines

Hope this helps (remember to rate this answer).

Check this diagrams (click for zoom)...



Fig. Accessory serpentine belt routing-2004-05 5.9L Diesel engines with A/C





Fig. Accessory serpentine belt routing-2004-05 5.9L Diesel engines without A/C

Hope helps (remember rated this).

You didn't list your motor size so please pick the applicable diagram:


Accessory serpentine belt routing—4.8L, 5.3L & 6.0L engines


Accessory serpentine belt routing—5.7L engines with A/C


Accessory serpentine belt routing—5.7L engines without A/C


Accessory serpentine belt routing—6.5L Diesel engines


Accessory serpentine belt routing—7.4L engines


Accessory serpentine belt routing—8.1L engines

Here is a diagram for a 5.7L Hemi, and 1 for a 5.9L diesel. Hope this helps!

5,7L HEMI

5.9L Diesel

5.9L DIESEL
The 5.9L diesel engine accessory drive system (with a/c) consists of :

1. Generator Pulley (1)
2. Water Pump Pulley (2)
3. Idler Pulley (3)
4. Power Steering Pump Pulley (4)
5. Radiator Fan Pulley (5)
6. Crankshaft Pulley (6)
7. Automatic Tensioner (7)
8. A/C Compressor Pump Pulley (8)

CAUTION: When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction. Refer to or for correct engine belt routing. The correct belt with correct length must be used.
1. Position drive belt over all pulleys except water pump pulley. 2. Attach a 1/2 inch ratchet to tensioner.


The 5.9L diesel engine accessory drive system (without a/c) consists of :

1. Generator Pulley (1)
2. Water Pump Pulley (2)
3. Idler Pulley (3)
4. Power Steering Pump Pulley (4)
5. Radiator Fan Pulley (5)
6. Crankshaft Pulley (6)
7. Automatic Tensioner (7)

3. Rotate ratchet and belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure belt is properly seated on all pulleys.