Hartford Motorcycles - Answered Questions & Fixed Issues

- OEM Honda Brake pads. These are the highest recommended pad on the list. They have great stopping power good feel readily available and are reasonably priced. Grade (5). - EBC Green Race. OK for a while not as good as OEM. Grade (2). - Galfer Green's,,,

Check out the classifieds on this motorcycle website:
https://bikez.com/motorcycles/hartford_hd-125s_2007.php

have the battery load tested and the charge circuit checked as it indicates insufficient battery charge to keep the engine running

Sorry to hear that you have no spark on you bike. Just a quick thought have you measured the battery voltage could your charger have damaged battery. I over charged my battery last year ( would only produce 8V) and had to get a new one along with an Optimax 3 charger so it would not happen again.,,

It is probably the side stand switch

why make multiple posts of the same question???? i answered this already its down for reserve and up for main

well reserve tank really just takes the tap for the fuel further down in the tank ie if you place the fuel tap to reserve then you can access the full tank if its on normal you can only access so much down in the tank anyway its down for reserve and up for main look here in this you tube vid https://www.youtube.com/watch?v=nVtL_z7ytxE

just get new bulbs

The sound and the high fuel consumption are all related. there are many things that might be wrong. it could be the fuel quality the carburettor air filter spark plug or even an elecrtical problem. but since you had the bike serviced but you are still experiencing problems i would try cleaning the spark plug. and when you fit the sparklug back, check wheter the wire going to the sparkplug is in perfect order. then put the bike in neutral, put in on the main stand, start it and check the big wire going to the sparkplug. listen if you can detect any noise in that area. if you hear a tik - tik sound, then there is a elecrtical leak. you should be able to repair that by yourself if not a normal service station would do. however if thats not the problem, then you should bring the bike to another service station,,,

Do you know the make and model of the tyre?

have you checked your fork-oil & or does it have steering damper adjusters?

can someone help me i need a hartford hd 125cc wiring diagram

hiya

sounds like the switch has gone o/c run a meter over it to see if it has stopped working

hope this helps

John

check all fuses, failing that check the kill switch.

Hi, it's 34mm across, the shoulder part is 6 mm deep, the bit that inserts into the wheel is 7mm deep.

Hi, you probably have a problem with the clutch or clutch switch. Check to see the defective one and replace to solve the problem....

Normally 28thou or 0.9mm

On my old BSA Rocket I had an Amal carb. Cleaning and adjusting the idle jet cured that problem on it.

Remove plug cap from spark plug and unscrew from HT lead. Clean it and put it to one side. Use a set of wire cutters to remove about 1/2 an inch of the HT lead and refit cap. This SHOULD sort it out. If it was more serious, like the CDI for instance, then it wouldn't spark at all, so thankfully it isn't serious. Hope this helps.

Sounds like you have a stuck float or a submerged.

It is pretty unusual but there could be some more serious malfunction like a chunk missing out of the neoprene cone that actually stops the fuel flow.

In any event, you need to get some eyes into the float chamber.