Honda Motorcycles - Page 5 - Recent Questions, Troubleshooting & Support
Remove mirror glass honda dn 01
Removing the mirror glass on the 2009 Honda DN-01 base model requires two steps. First, remove the plastic mirror cover by pushing it inward and up to remove it from its clips. Then, use a flathead screwdriver to gently pry around the outside edge of the mirror glass until it pops off of the mirror base.
2006 honda 350 es 4x4 4-wheeler
no info generic answer use these service manuals to assist in problem --------------------https://www.manualslib.com/products/Honda-Trx350fe-Fourtrax-350-4x4-Es-3561003.html----------------------https://www.manualslib.com/manual/804553/Honda-Trx350tm-Rancher.html
2/10/2023 2:37:42 AM •
Honda...
•
Answered
on Feb 10, 2023
Honda CBR650. number of liters of fork oil please?
Question edited for clarity and add maker,
Question moved to model category.
Full service information here. It a mix or volume and then oil level.
https://www.bikesinfotech.com/fork-188.html
Pour the specified amount of recommended fork fluid into the fork tube.
RECOMMENDED FORK FLUID:
Honda Ultra Cushion Oil 10W or equivalent
FORK FLUID CAPACITY:
CBR650F/FA: 505 +- 2.5 cm3
(17.1 +- 0.08 US oz, 17.8 +- 0.09 Imp oz)
CB650F/FA: 482 +- 2.5 cm3
(16.3 +- 0.08 US oz, 17.0 +- 0.09 Imp oz)
Slowly pump the fork tube several times to remove any trapped air from the lower portion of the fork tube.
Compress the fork tube fully and measure the fluid level [1] from the top end of the fork tube.
[1] FLUID LEVEL:
CBR650F/FA: 140 mm (5.5 in)
CB650F/FA: 128 mm (5.0 in)
Honda XLR125 (1998) pulls good from 1st to 4th but won't seem to pick up in top unless it's flat or down hill. Even then it's revving high and struggling to get past 40mph!.
It sounds like the issue with your Honda XLR125 (1998) not picking up speed in top gear could be related to a clutch problem. If the clutch is slipping, it could be causing the engine to rev high and prevent the bike from reaching higher speeds. Clutch slipping is often a result of worn clutch plates, which can cause decreased friction and ineffective transfer of power from the engine to the transmission.
Based on your description, it may be necessary to replace the clutch plates to resolve the issue. If you're unsure about the condition of the clutch, I would recommend having a professional mechanic inspect it to diagnose the problem and recommend the appropriate repairs. It's important to address any clutch issues as soon as possible to prevent further damage to the engine and transmissio
2/2/2023 12:43:16 AM •
Honda...
•
Answered
on Feb 02, 2023
Honda cbr f4i have no spark
NEED MORE INFO.
BUT ALWAYS MAKE SURE YOU HAVE A GOOD AND CHARGED BATTERY , AND GOOD CLEAN GROUND .
1/18/2023 7:01:43 PM •
Honda...
•
Answered
on Jan 18, 2023
Not finding what you are looking for?