Honda Motorcycles - Answered Questions & Fixed Issues


your crank case oil lubricates all of your internals including your clutch pack! if your crankcase oil is full and you clutch doesn't work still drain you oil and remove the right side crankcase cover that is where your clutch pack resides remove the clutch basket and check the clutch pack plates for ware they may need replacement! Empty your gas tank and start with fresh gas good chance your carburetors are gummed up from stale gas which will make it run rough and usually loose the ability to idle! as for your font brake check to make sure the master cylinder for it is topped up with fluid is so try bleeding it if after bleeding the brakes no improvement is noticed remove the front brake assembly pull the pads off and check to see if there is any movement in the calipers themselves they may have seized from sitting! and there is no honda virago, virago is a yamaha and i think if u have an 82 xv its a yamaha virago

Honda... | Answered 3 hours ago | 28 views


The link below found when he changed the bulb the fuse stopped blowing
http://v4musclebike.com/forums/showthread.php?t=21542
Some other good info on that link

Honda... | Answered 3 hours ago | 17 views


With the vin number your honda dealer may be able to make you a new key.

Honda... | Answered 3 hours ago | 14 views


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.hondashadow.net/threads/replacing-fuel-pump-96-shadow-vt1100c.96663/
https://www.hondashadow.net/threads/easy-way-to-change-1100-fuel-filter.81936/
https://www.manualslib.com/manual/1188474/Honda-Shadow-Vt1100.html
https://www.partsfish.com/page/oem-parts-for-honda
https://www.acura.com/assets/OWNERLINK/Model/own_man/powersports/2006/2006_VT1100C.pdf

1994 Honda VT... | Answered 3 days ago | 26 views


Hi, Mike for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.slonaker.net/helixforum/viewtopic.php?f=4&t=750
https://www.youtube.com/watch?v=KaIcMGVIIDk
http://mpsracing.net/technical/helix-manual/index.html
https://www.partsfish.com/page/oem-parts-for-honda
https://www.manualslib.com/manual/1192243/Honda-Cn250.html

2005 Honda Helix... | Answered 3 days ago | 26 views


Hi, Jackal if your headlight is not working, intermittent, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your headlight bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to the headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/low beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.600rr.net/threads/how-to-fix-headlights-not-turning-on-issue.138034/
https://cbrforum.com/forum/general-tech-9/headlights-not-working-91729/
https://www.youtube.com/watch?v=M0Z7f5kZKeE
https://www.tradebit.com/filedetail.php/281472194-honda-cbr-600-2013-workshop-repair-service $17
https://www.partsfish.com/page/oem-parts-for-honda
https://ownersmanuals2.com/honda/cbr600rr-2014-owners-manual-60895

2008 Honda CBR... | Answered 3 days ago | 22 views


Hi, John for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sa=X&q=Wiring+diagram+1998+Honda+CB600F&tbm=isch&source=univ&ved=2ahUKEwjB4I6LuOPlAhWKpFkKHaI5C70QsAR6BAgGEAE&biw=1440&bih=757
http://classiccycles.org/1852/597922.html
https://www.manualslib.com/manual/1051877/Honda-1998-Cb600fw.html
https://www.partsfish.com/page/oem-parts-for-honda
https://www.manualslib.com/manual/922653/Honda-Cb600f.html

1998 Honda CB... | Answered 3 days ago | 19 views


Hi, Mike before diagnosing any brake light issue always check the bulb and fuse first for integrity a brake light staying on is usually caused by the front brake light switch, which is mechanical, not disengaging. On early models moving the throttle control housing closer to the front brake master cylinder is the main fix. On late models, the switch gets tweaked and needs to be realigned. A brake light that does not come on when the brake lever is applied can be caused by a faulty switch or no continuity in the wiring at the switch. The rear brake light switch is hydraulic and it is extremely rare to malfunction in a closed circuit condition causing the brake light to stay on. Usually, rear brake light switch issues are caused by no brake pedal free play or a sticky rear master cylinder piston. A brake light that does not come on when the rear brake pedal is depressed can be caused by a faulty switch, air contamination in the brake line, or no continuity in the wiring at the switch. Finally, most tail light wiring harnesses run under the rear fender held in place by spot welded clips. Worn out rear shocks or lowered suspension can bottom out causing the rear tire to come in contact with the wiring harness, rubbing the insulation off, exposing the bare metal inner core, allowing it to break or short out.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/892243-1987-xl250r-brake-light-problems/
https://www.youtube.com/watch?v=7VA3fSRl8_Q
https://www.ebay.com/i/362701534617?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=362701534617&targetid=593772240933&device=c&mktype=pla&googleloc=9012440&poi=&campaignid=2086088136&mkgroupid=80059919711&rlsatarget=pla-593772240933&abcId=1141016&merchantid=6296724&gclid=EAIaIQobChMI2I6v-LHj5QIVQ9yGCh2RXASwEAQYAiABEgLN-_D_BwE $25
https://www.partsfish.com/page/oem-parts-for-honda
http://www.hondampe.com.au/docs/owning_a_honda/owners_manuals/motorcycles/XL250-1973.pdf

Honda... | Answered 3 days ago | 16 views


Hi, Jerald for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+2003+Honda+CMX+250+Rebel&tbm=isch&source=univ&sa=X&ved=2ahUKEwjbtKXVrePlAhXkzVkKHfp7CoEQsAR6BAgIEAE&biw=1440&bih=757
http://classiccycles.org/1852/597922.html
https://www.manualslib.com/manual/1232303/Honda-Rebel-250.html
https://www.partsfish.com/page/oem-parts-for-honda
http://www.worldboatshows.com/honda/honda_ca_250_rebel_owners_manual.pdf

2003 Honda CMX... | Answered 3 days ago | 31 views


ask a honda dealer or google it

Honda... | Answered on Nov 11, 2019 | 15 views


i assume you mean you run it with the choke closed?? if so i would think some carb passages are blocked and not flowing fuel correctly. either really clean the carb passages or just simply replace the carb

Honda... | Answered on Nov 09, 2019 | 15 views


Hi, Anonymous the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.carlsalter.com/honda-service-manuals.asp
https://www.partsfish.com/page/oem-parts-for-honda
https://www.manualslib.com/manual/677844/Honda-Cr250r.html
https://bikez.com/motorcycles/honda_cr_250_r_1995.php
https://en.wikipedia.org/wiki/Honda_CR250R

Honda CR 250 R... | Answered on Nov 09, 2019 | 72 views


Hi Steve, Have you looked into Amsoil? www.amsoil.com They make synthetic oil that is better than petrolium base and has a longer life between changes. Hope this helps

2000 Honda CBR... | Answered on Nov 08, 2019 | 283 views


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.motorcycleinth.com/forum/viewtopic.php?showtopic=7610
https://www.youtube.com/watch?v=H7w_Dw8MfA8
https://tricserefworltril.files.wordpress.com/2016/06/141.pdf

Honda... | Answered on Nov 08, 2019 | 62 views


Hi, Sisto for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://classiccycles.org/1852/597922.html
http://www.sohc4.net/honda-wiring-colors
https://www.manualslib.com/
https://www.partsfish.com/page/oem-parts-for-honda
https://powersports.honda.com/downloads/owners-manuals

Honda... | Answered on Nov 07, 2019 | 24 views


ya gotta ask yourself WHY do I want to do that?
Even if it is possible, it is a giant leap backwards.
I will guess that it is not possible unless you want to build the parts required. But it may still not be possible.

Honda... | Answered on Nov 07, 2019 | 20 views


THE FIX IS REPLACE IT WITH A NEW UNIT

Honda... | Answered on Nov 05, 2019 | 16 views


Batt must b 12.6v no less..check alternator connection or the chargn wire. Make sure carb n compression r normal. Put some marine fuel cleanr in tank

Honda... | Answered on Oct 21, 2019 | 32 views

Not finding what you are looking for?
Honda Logo

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5954 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

richard libby

Level 2 Expert

209 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...