20 Most Recent 2012 Husqvarna TE 310 Questions & Answers

If you have already replaced the flywheel, stator, and CDI, the next step would be to check the ignition coil and spark plug. It is possible that the ignition coil is faulty and needs to be replaced. Check the spark plug for any damage or wear and replace it if necessary. Additionally, make sure all the wiring connections are secure and free of corrosion. If none of these steps fix the issue, it may be best to take the bike to a mechanic or dealer for further diagnosis. They may be able to identify any other potential problems that could be causing the intermittent spark issue.

Hi, Please double check that your air filter is not clogged and also check that your fuel is mixed properly. If those approaches fail, please call Husqvarna to provide a different approach at 1 (800) 487-5951. Thank you.

Question edited for clarity. Question moved to Husqvarna Motorcycle. click on the link. Also click the images tab. https://www.google.com/search?q=2006+TE450+cam+timing+marks ..

My first thought is that is the primer bulb in the right way round as effectively, it is a one way valve New bulbs also fail to work properly. I reckon that is why they come in packs of 10 :>D Take it off, connect it to fuel and make sure it pumps. Also please note that we are not Husqvarna, we just have the category for easy filing.

Possibly the seat timer or other false operator not present.

Wiring diagram is in the operators manual, no cost download off the Husqvarna website or other.

Test, Don't Guess

Most likely it will be the stater. And they are pricey. Coils hardly ever go bad or the only other thing that would cause a no spark problem could be the kill button. I hate to say it, but i think it will be the stater.

Ok.. The rectifier only changes AC voltage to DC voltage.. the voltage to charge the battery comes from the generator. With the engine running at half throttle+, and IN NEUTRAL, check the voltage at the battery terminals it should be 13 volts +. If you are not getting at least that much.. make sure all connections are tight.. if its less than 13V..... more checking is indicated. (Shop time)..sorry...

with the caps removed and the forks compressed all the way, the oil should be 6 inches from the top.

Does the engine spin freely, is the battery dead?

Hi ! for an informantion please visit the website below. If you need more information about a specific electrical issue you can reach me at [email protected]://www.motorpartstore.com.Good luck and have a nice day. Motor Part Store Motor Parts Wholesale Shenzhen Too Star Technology Co Ltd dirt bike parts ATV parts

Melvin what help are you after , advice online or in person

Clutch Replacement On A Motorcycle or Atv ... - YouTube

? 5:07 www.youtube.com/watch?v=br63PLcq3sU May 8, 2008 - Uploaded by Rocky Mountain ATV MC Simple instructions on how to replace the clutch on an off-road motorcycle or ATV. .... Hi I have a 05 drz400sm an I just did theclutch wire, tusk clutch ... I would start with the most obvious like properly adjusting your cable to ...

Fuel issues, carb issues, secondary electrical system issues. Spark, fuel, compression & it will start. Start checking systems.

images for tc 450 husqvarna thermostat location

Do you have a dip stick, or a sight glass?

I would think that's highly unlikely. Somewhere along the way there is some link with Cagiva but if you are in the states then there a selection of new and used clutch parts including a basket on ebay

Not on the line to the starter. But the starter switch probably works through a solinoid. If it's not on the starter it's some where between starter and battery . The starter switch must provide the signal to the solinoid. If the Starter switch or ignition switch are not getting "juice" look for bad connections and or a fuse box.

take plug out to check for fire, if you have fire turn screws all the way in and back off a turn and a half. Fire it up and adjust