Top 20 2012 Kymco Agility 50 - Page 8 Questions & Answers


It takes the alternating current from the Alternator (generator) and turns it into 12 volts DC (direct current - no waveform) to charge your battery.

Motorcycles | 155 views | 1 helpful votes


Hi, Leonel derestrict is a negative term rider's use to express their wish to improve performance on their bike or scooter. Depending on the country and motor vehicles laws some bikes and scooters are designed to conform with said laws and their performance is slightly lower than other countries. All vehicles in the world are designed to perform at 75-80% of their maximum potential, this ensures the longevity of the engine. Derestricting or improving performance is always possible on any vehicle but the tradeoff of engine longevity numbers go down, how much depends on the number and type of performance upgrades. Your local dealership or reputable independent shop are best equipped to provide you with technical data and willingness to comply with your needs.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.scooter-center.com/en/variator-kit-polini-speedcontrol-suzuki-400-cc-type-burgman-k7-injection-p241651
https://www.google.com/search?q=Derestrict+2007+Suzuki+Burgman+400&sxsrf=ACYBGNTDvpTZMvfzfrIoiaSSJ2DmNY6wvg:1581485270164&source=univ&tbm=shop&tbo=u&sa=X&ved=2ahUKEwi8kPvdo8vnAhWMmuAKHUu8BpIQsxh6BAgLECw&biw=1440&bih=757
https://www.manualslib.com/manual/815549/Suzuki-An400.html#product-Burgman%20AN400
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/

Motorcycles | 58 views | 0 helpful votes


We cannot give you diamonds or coins
Please understand that you are talking on a public forum to regular people who offer advice, not to the company that made your singing monster.

Motorcycles | 375 views | 1 helpful votes


I know that on a Polaris, it has a safety feature that limits how much throttle can be used in reverse. It will go WAY to fast in reverse without it and be very dangerous. There is, however a manual override switch to defeat this feature temporarily while holding the switch in. Then your in control of what happens. I would check to see if this applies to your rig.

Motorcycles | 65 views | 0 helpful votes


Hi, Johnny you need to repost your question under the ATV category, not Motorcycles. Thanks, Gregg

Motorcycles | 69 views | 0 helpful votes


Hi, Ronald could you take a close up picture of the carburetor including the puddle and email to me at xlch@mail.com also I need to know what model Harley you have. Thanks, Gregg

Motorcycles | 60 views | 0 helpful votes


Hi, Kenneth, I would really love to help you with your bike question but due to the magnitude of yesterday's solar flare the batteries in my crystal ball are dead and my mental telepathy headset circuitry was melted. I need the year, make, and model of your motorcycle please click on " Ask For More Information" directly below and provide this information in the box that will open and then click on the green "SEND" box in the bottom right-hand corner after it posts I will receive an "ALERT" icon that will allow me to respond to your information. Good luck and have a wonderful day.

Motorcycles | 68 views | 0 helpful votes


It is wasn't spitting and sputtering while trying to start, I would suspect a fuel problem.

Motorcycles | 35 views | 0 helpful votes


Hi, Anonymous 031 = diagnosis of the ignition coil cylinder 2
for this scenario, you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.motorcycle-manual.com/yamaha-fault-codes/
https://opgsff.org/files/GTS1000.pdf Free Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
http://mybikemanuals.com/yamaha/

Motorcycles | 28 views | 0 helpful votes


Hi, Joseph you need to make sure you have no intake leaks by spraying some Brake Kleen, Contact Cleaner, Starting Fluid, etc. around the intake manifold and seals, if the RPM's go up or down significantly then you have a leak that needs to be fixed before you can continue with the carburetor adjustment.
The engine should be at operating temperature with the choke off to set the idle at 1300 rpm. Turn the idle skrew clockwise to increase the idle speed and counterclockwise to decrease the idle speed. If you have access to your air-fuel mixture skrew you may turn it as well, if not there is a video below on how to gain access, make sure you start with clean or new spark plugs. Gently turn the air-fuel mixture skrew clockwise until it starts to bottom out "STOP" do not over tighten as it will damage the taper on the end, now back the skrew out 1-1/2 full turns to establish a starting point start the engine and check the idle rpm's and turn the idle skrew accordingly for 950-1050 rpm if necessary, turn the air-fuel mixture skrew 1/4 turn at a time and let the engine settle for about 10 seconds, turn the skrew clockwise for a leaner mixture and counterclockwise for a richer mixture, you are seeking the highest rpm your air-fuel mixture skrew can acquire without going past 3 full turns from the bottom then resetting the idle skrew back down to 950-1050 rpm If you can not detect any rpm change and can not stall the engine by turning the air-fuel mixture skrew all the way in then your pilot/low-speed jet is too big and needs to be replaced with the next size smaller. Final adjustment should be made with a clean air filter mounted to the carburetor.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.motorcycleforum.com/threads/problem-with-the-bike-not-idling-98-gsxr-600.94476/
https://www.riderforums.com/threads/idle-speed.43499/
https://www.manualslib.com/manual/896122/Suzuki-Gsx-R600.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/

Motorcycles | 31 views | 0 helpful votes


Hi, Chris for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ACYBGNQw80TNKgGm1uJ8_Y0dHm7Jq4X77A:1580978679798&q=Wiring+diagram+1999+Suzuki+GSX-R600+SRAD&tbm=isch&source=univ&sa=X&ved=2ahUKEwjPhe3ExLznAhUDpFkKHdX6Ch4QsAR6BAgJEAE&biw=1440&bih=757
http://www.classiccycles.org/1852/597964.html
https://www.manualslib.com/manual/896122/Suzuki-Gsx-R600.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/

Motorcycles | 29 views | 0 helpful votes


Hi, Joseph for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.amazon.com/97-00-SUZUKI-GSXR600-Economy-Carburetor/dp/B002OPPKKY
https://www.youtube.com/watch?v=SFj1yM6m5QI
https://www.manualslib.com/manual/896122/Suzuki-Gsx-R600.html
https://www.partsfish.com/page/oem-parts-for-suzuki
https://www.manualslib.com/manual/1215216/Suzuki-Gsx-600f-2000.html

Motorcycles | 28 views | 0 helpful votes


find a seller and ask this question. fixya doesnt have any prices on anything

Motorcycles | 28 views | 0 helpful votes


Hi, Donny for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Buddy, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ACYBGNRaeWKfgwktwrfgZL-rjjmnV6ZkSw:1581486754822&q=Wiring+diagram+2015+Genuine+Buddy+50&tbm=isch&source=univ&sa=X&ved=2ahUKEwitvPOhqcvnAhWxTd8KHVmWByEQsAR6BAgKEAE&biw=1440&bih=757
https://www.scooterwest.com/discover-learn/buddy-50-125-wire-diagram/
http://www.modernbuddy.com/pdf/buddy50_service_manual.pdf
https://www.scooterdynasty.com/buddy502tac-2.aspx
https://www.manualslib.com/manual/824529/Genuine-Buddy-50.html

Motorcycles | 44 views | 0 helpful votes


Hi, Will you need to repost your question under the Torque Wrench category, not Motorcycles. Thanks, Gregg

Motorcycles | 41 views | 0 helpful votes


Battery is bad or weak..must b 12.6 v always. Check connections or alternator for chargin. Chec for fuel flow. Carburator cud b filthy

Motorcycles | 63 views | 0 helpful votes


Hi, G I would really love to help you with your bike question but due to the magnitude of yesterday's solar flare the batteries in my crystal ball are dead and my mental telepathy headset circuitry was melted. I need the year, make, and model of your motorcycle please click on " Ask For More Information" directly below and provide this information in the box that will open and then click on the green "SEND" box in the bottom right-hand corner after it posts I will receive an "ALERT" icon that will allow me to respond to your information. Good luck and have a wonderful day.

Motorcycles | 25 views | 0 helpful votes

Not finding what you are looking for?
2012 Kymco Agility 50 Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Kymco Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6151 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Agility 50 Kymco

  • Agility 50 Kymco

Most Popular Question

when apply both brakes stalls won 39 t

  • Motorcycles
Loading...