20 Most Recent 2007 Suzuki Boulevard C50 Questions & Answers


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://itstillruns.com/how-do-i-check-the-oil-in-suzuki-bikes-10354.html
https://www.volusiariders.com/60-help/139548-easy-way-check-c50-oil-level.html
Suzuki VL800 Service Manual
https://www.partsfish.com/oem-parts-for-suzuki
Suzuki VL800 Owner Manual

2007 Suzuki... | Answered on May 12, 2019


Hi, Jah4d it should be noted that the "AIR FUEL" mixture screw adjustment "ONLY" manages your idle and has no effect on any other circuit also any intake leaks must be repaired before the A/F adjustment procedure can be performed otherwise you will never obtain a proper idle and you will waste a lot of time chasing the impossible. The A/F mixture screw's purpose is to fine tune the fuel charge entering the combustion chamber. The following applies to both 2 and 4 stroke engines:
1. The mixture screw may be sealed at the factory with a Welch Plug please review the following video for removal.
https://www.youtube.com/watch?v=wAXcksgvDkM
2. The mixture screw manages a range of 3 complete 360-degree counterclockwise turns from the bottom/closed position.
3. The mixture screw should have a spring and o-ring for tension and sealing integrity.
4. Turn the mixture screw clockwise until it gently bottoms out, this makes the fuel charge very lean and the engine should not idle if it does then the pilot/idle jet is too big and needs to be replaced with the next size smaller.
5. Turn the mixture screw 1 and 1/2 turns counterclockwise to establish a baseline for starting the engine.
6. To fine-tune the idle circuit, adjust the mixture screw 1/4 turn in or out to achieve maximum idle RPM, wait 15 seconds between each adjustment for the idle to settle.
7. Never go past 3 full turns out this will make the fuel charge rich, foul plugs, and produce black smoke out of the exhaust, if the engine RPM keeps increasing past 3 turns the pilot/idle jet is too small and needs to be replaced with the next size larger.
8. After achieving maximum idle back out the mixture screw another 1/8 of a turn then adjust the throttle cable idle stop screw to 950-1050 RPM.
9. This procedure works great on 99% of all engines, for the 1% that demand a more robust throttle response on aftermarket monster fuel delivery systems additional tweaking outside the box may be necessary.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.motorcycleforums.net/forum/boulevard/49838-2006-boulevard-c50-fuel-adjustment.html
https://www.youtube.com/watch?v=gzdjLZHdDLk
https://www.tradebit.com/filedetail.php/281006250-suzuki-boulevard-c50-2001-2009-service-repair-manual $15
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

2007 Suzuki... | Answered on Apr 23, 2019


Hi, Kathy for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.motorcycleforums.net/forum/boulevard/29001-wheres-battery-06-c50.html
How to Access the Battery in 2005 Suzuki Boulevard C50
https://www.tradebit.com/filedetail.php/281006250-suzuki-boulevard-c50-2001-2009-service-repair-manual $15
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

2007 Suzuki... | Answered on Apr 09, 2019


Hi, Anonymous and the usual suspects are:
1. Dirty or clogged air filter.
2. Faulty spark plug.
3. Bad Gas.
4. Improper oil level.
5. Improper chain adjustment and lubrication.
6. Low tire pressure.
7. Dirty or contaminated carburetor needs cleaning and tuning.
8. Clogged or faulty fuel pump or injectors.
9. Improper valve adjustment.
10. Slipping clutch.
11. Improper timing.
12. Low compression.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.volusiariders.com/60-help/291322-05-m50-rough-idle-loss-power.html
http://cruiser.mototribe.com/discuss/loss-power-i-thought-it-was-my-spark-plugs-its-not
https://www.tradebit.com/filedetail.php/281006250-suzuki-boulevard-c50-2001-2009-service-repair-manual $15
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

2007 Suzuki... | Answered on Apr 09, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.motorcycleforums.net/forum/volusia-c50-getaway/9820-c50-gas-tank-removal.html How to take the gas tank off on suzuki boulevard M50 Suzuki Boulevard C50 2001 2009 Service Repair Manual Download Manuals... $15 https://www.partsfish.com/oem-parts-for-suzuki https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Feb 19, 2019


Hi, Laurence the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf
https://www.partsfish.com/oem-parts-for-suzuki
Suzuki Boulevard C50 2001 2009 Service Repair Manual Download Manuals... $15
https://www.motorcyclespecs.co.za/model/suzu/suzuki_boulevard_c50%2008.htm
Suzuki Boulevard C50

2007 Suzuki... | Answered on Feb 19, 2019


Hi, Anonymous and the usual suspects are:
1. Oil tank/system overfilled.
2. Faulty breather valve.
3. Engine breather hose bent, pinched, kinked etc.
4. Air filter has too much "pre-oil".
5. Crankshaft seal failure allowing transmission fluid to migrate.
6. Blow by drain tube cracked/split or filled to capacity.
For more information about your question and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.volusiariders.com/60-help/226506-blowing-oil-out-airbox-2.html
http://cruiser.mototribe.com/discuss/oil-blow-back
Suzuki Boulevard C50 2001 2009 Service Repair Manual Download Manuals... $15
https://www.partsfish.com/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Feb 19, 2019


Hi, Carl before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Totally dead no power Suzuki Volusia Forums Intruder Volusia and Boulevard...
2006 Boulevard will not start
Suzuki Boulevard C50 2001 2009 Service Repair Manual Download Manuals... $15
https://www.partsfish.com/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Feb 19, 2019


Hi, Cmtboss4 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2007 C50 Gas Tank Removal Question Suzuki Volusia Forums Intruder Volusia...
How to take the gas tank off on suzuki boulevard M50
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Sep 27, 2018


Hi, Mastermcse before testing any electrical component in the Turn Signal Light Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have 12.5 volts or more but little or zero amps causing the battery to be faulty and must be replaced, "AGM" batteries fall into this category more so than lead-acid types, also before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced your OEM lights with one or all LED lights you are going to need a load equalizer.
If no turn signals are working the cause could be a faulty turn signal module/flasher or the connector going to it, look for, corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion.
If your turn signal comes on but takes several seconds before it starts flashing you may have dirty contacts in the turn signal switch/button, the switch needs to be opened up and cleaned also the flasher may be starting to fail. It should be noted that cold weather will only exacerbate the situation especially when temperatures drop down below freezing and the location of the component, turn signal switches on the handlebar are at the mercy of the oncoming freezing 70 mph wind and makes it hard for the contacts to do their job covered in frozen grease/grime
If all four turn signals flash at the same time like hazard lights even though you only pressed one turn signal button then you have a LED light in the circuit and need a load equalizer that can be purchased from any motorcycle parts supplier.
If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function.
If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction.
If your rear turn signals don't work check your rear fender wiring harness connector first, for corroded, broken, loose pins/sockets, power, and a good ground, the harness connector is usually located under the seat on the front of the rear fender then keep tracing the wiring look for obvious harness damage caused by the rear tire.
If you still can't find the malfunction backtrack from the rear fender wiring harness connector.
If one side does not work you could have a faulty turn signal switch or module check for continuity.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Electrical turn signal problem Suzuki Volusia Forums Intruder Volusia and...
diagnosing and repairing turn signal problems
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
Suzuki 2004 VL800 Owner Manual

2007 Suzuki... | Answered on Sep 27, 2018


Hi, Embrett for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Shifter adjustment Suzuki Volusia Forums Intruder Volusia and Boulevard...
How to Adjust Your Shifter 2 Ways
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Sep 27, 2018


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2007 Suzuki Boulevard C50 wiring diagram Google Search
Suzuki Motorcycle Wiring Diagrams
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Sep 27, 2018


Hi, Jwhitley20 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to Change Your Coolant Suzuki Volusia Forums Intruder Volusia and...
Suzuki Boulevard C50 2007 Coolant Exchange
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Sep 25, 2018


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
C42 Error Help Suzuki Volusia Forums Intruder Volusia and Boulevard Forum
Suzuki Fault Codes
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Sep 25, 2018


Hi, Lesrambler12 and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, stator, magneto, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Faulty neutral, side stand or clutch lever safety switch.
10. Faulty or corroded kill switch.
11. Accelerator pump damaged or not working.
12. Water or dirt in the fuel system, carburetor or filter.
13. Restricted, blocked or kinked fuel line.
14. Fuel tank empty.
15. The gas cap is not venting properly or fuel tank venting system blocked, loosen gas cap and go for a test ride.
16. A failed fuel pump, pressure regulator and or fuel injectors.
17. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
18. Needle and seat stuck closed in the float bowl.
19. Petcock clogged or damaged.
20. Lean angle switch is faulty or needs adjustment.
21. Catastrophic engine failure, perform a compression test.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
C50 running rough backfiring won stay idle Suzuki Volusia Forums Intruder...
Suzuki Boulevard C50 idle problems pt 2
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Sep 25, 2018


Hi, Chuck_98056 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Ignition switch removal Suzuki Volusia Forums Intruder Volusia and...
Suzuki Intruder Volusia ignition barrel replacement overview
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Sep 25, 2018


Hi, Ph it should be noted that the reasons your FI light stays on constantly or flashes and your bike will or will not start and may turn over or may not and run great or sputter, these conditions will vary from bike to bike depending on the year, make, and model and you should always refer to your owners/service manual for proper diagnostic procedures. It should also be noted that any type of prior work done to the bike or an abnormal event occurrence IE: adding accessories, electrical curiosity/adventures, laying the bike down/crashes, rain storms/bike washings just before FI light issues started can be significant hints/aids into tracking down the gremlin, also carry the appropriate jumper wire to access fault codes to reduce the risk of being stranded or towed. The newer the bike the more sensitive the ECM becomes and will not let the bike start when aftermarket accessories have been installed without being reprogrammed. That being said the usual suspects are:
1. Faulty Fuel Pump, fuse or system relay switch.
2. Battery starting to fail due to old age/damage, perform a load test.
3. A discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Faulty safety switches/sensors: run/off, ignition, clutch lever, neutral, side stand, tip over, fuel, and or their connections.
5. Broken wire or worn insulation exposing wire to a ground situation especially inside wire harness at tight bends around fairing brackets, under dash panels, under fuel tanks over cylinder heads etc. Many harnesses are open on the ends that will allow water to enter and accumulate at v-bends.
Dielectric grease and contact cleaner are your best friends for wire/cable/harness connectors, look for corroded, broken, or loose pins/sockets.
6. Installation of aftermarket accessories ie. exhaust systems, mufflers, air cleaners, fuel tuners, electrical component etc.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Suzuki Fault Codes
Suzuki Street Bike How To Pull Codes FI Light
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Sep 25, 2018


Hi, Anonymous before testing any electrical component in the Starter Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries. Depending on battery voltage starter relays and starter solenoids can make the same noise when you hit the starter button. You can easily determine which one is at fault by two simple tests:
STARTER RELAY- place your thumb and index finger on the starter relay and press the starter button, if you feel the click then the relay is faulty and needs to be replaced.
STARTER SOLENOID- bridge the positive and negative poles of the solenoid with a small screwdriver if you get a loud clunk then the solenoid needs to be rebuilt or replaced as necessary. If the engine turns over then replace the starter relay.
A motorcycle starter relay is an electronic mechanical switch that has a small coil winding around a piece of metal that requires low amperage and thin wires to be activated. When you turn on your ignition switch power 12 volts is sent to the relay coil which in turn becomes a magnetic contact point that pulls a spring-loaded contact point to itself completing an electrical circuit that allows more amperage necessary to be accessed by the starter solenoid which in turn acts in the same way as the relay but on a larger scale with its stronger heavier contacts making available the necessary amperage to turn the starter motor. If your battery has low voltage it, in turn, makes the magnetic contact point weak in trying to pull its counterpart to make a connection. These relays are usually encased in a plastic housing that is sealed depending on the quality of the product. When activated they will produce a small amount of heat to their metal components which in turn can create the perfect environment for condensation to form depending on weather conditions and how careless you may be with a water hose or sprayer while washing your bike. After a period of time, several months to several years depending on the circumstances this condensation is the starter button for electrolysis and the slow build-up of corrosion which ends by preventing the magnetic contacts in making a solid connection and alerts you to this situation with the customary greeting "CLICK or BUZZ" if you get a single loud "CLUNK" then the starter solenoid is at fault and needs to be rebuilt or replaced as necessary. The relay is inexpensive and needs to be replaced however in a pinch they can be forcibly opened cleaned and resealed with silicone. In a nutshell, motorcycle starter relays take in low amperage and send out higher amperage when activated and for curious minds, the voltage remains constant at whatever your battery reads at the time.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
C50 just click won start Suzuki Volusia Forums Intruder Volusia and...
M109R Not Starting Clicking Solution Exploring
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Sep 25, 2018


Hi, Gary for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2007 Suzuki Boulevard C50 neutral switch location Google Search
30results for neutral safety switch
Suzuki VL800 Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2007 Suzuki... | Answered on Aug 09, 2018

Not finding what you are looking for?
2007 Suzuki Boulevard C50 Logo

37 questions posted

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Boulevard C50 Suzuki

  • Boulevard C50 Suzuki

Most Popular Question

fuses 2007 suzuki boulevard c50

  • Motorcycles
Loading...