20 Most Recent 2007 Suzuki RMZ 450 - Page 3 Questions & Answers


change spark plugs.....also check timing is correct or not...

Suzuki... | Answered on May 28, 2019


Hi, Fred for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
SuzukiSavage com Torque specs List
http://gstwins.com/wiki/index.php?n=Main.TorqueSettings
https://onedrive.live.com/?authkey=%21APM7hx6Q2ynLu-A&cid=2370B62DDF9F0C6B&id=2370B62DDF9F0C6B%211334&parId=2370B62DDF9F0C6B%211276&o=OneUp
https://www.partsfish.com/page/oem-parts-for-suzuki
http://gsarchive.bwringer.com/mtsac/~cliff/storage/gs/GS450GA_Owners_Manual.pdf

Suzuki... | Answered on May 24, 2019


Hi, Anonymous and the usual suspects are:
1. Idle port, transfer ports, slow air jet clogged.
2. Idle adjusting screw set too low.
3. Air fuel mixture adjustment too lean.
4. Pilot/slow fuel jet clogged.
5. Faulty accelerator pump.
6. Float level too low.
7. Float bowl contaminated old fuel, water, dirt, rust, etc.
8. Carburetor bowl vent line clogged/blocked/pinched.
9. Fuel line to carburetor kinked or pinched.
10. Fuel filter clogged.
11. Intake manifold leak.
12. The gas cap is not venting properly or fuel tank venting system blocked.
13. Vacuum line from the intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
14. Needle and seat stuck closed in the float bowl.
15. Multi carburetors not in sync.
16. Faulty fuel pump or internal fuel line has pinholes.
17. Fuel injectors clogged or faulty.
18. Faulty throttle position sensor.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/728882-1986-suzuki-sp125-help-please
https://www.youtube.com/watch?v=IJUNl8a_Qj8
Suzuki DR 125 Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 20, 2019


Hi, Curt for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere $20 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+1972+Suzuki+TS+50&tbm=isch&source=univ&sa=X&ved=2ahUKEwiUsvzU4KLiAhWRjlkKHc3GDpoQsAR6BAgJEAE&biw=1366&bih=625
Suzuki Motorcycle Wiring Diagrams
https://www.tradebit.com/filedetail.php/278822910-suzuki-ts50-ts-50-motorcycle-complete-workshop-service $20
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 17, 2019


Hi, James for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://dirtrider.net/forums3/threads/rm80-power-valve-adjuster.112075
1997 Suzuki RM250 Power valve adjustment Question How to
https://www.tradebit.com/filedetail.php/281605606-suzuki-rm80-service-manual-repair-2000-rm $15
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 15, 2019


Hi, J_quast and the usual suspects are:
1. Damaged or restricted fuel tank venting system.
2. Loose float bowl screws.
3. Damaged float bowl o-ring.
4. improper fuel level in the float bowl.
5. A worn or dirty inlet valve or seat.
6. Damaged or leaking float assembly.
7. Particle contamination in inlet fitting cavity.
8. Damaged petcock diaphragm allowing fuel to flow through the vacuum line into the combustion chamber.
9. Contaminated fuel tank.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.totalmotorcycle.com/BBS/viewtopic.php?t=13839
Carbs leaking Here is how to fix it
Suzuki GS850G Service Manual
https://www.partsfish.com/oem-parts-for-suzuki
http://gsarchive.bwringer.com/mtsac/~cliff/storage/gs/1982_GS850G_Owners_Manual.pdf

Suzuki... | Answered on May 15, 2019


Hi, Mazdamx62fly before testing any electrical component in the Charging System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
2. To check the regulator unplug it from the stator. Take a test light and clip it to the negative terminal of the battery and then touch first one pin and then the other on the plug that goes to the regulator. If you get even the slightest amount of light from the test light the regulator is toast.
To do this with a meter: black lead to battery ground, red lead to each pin on the plug, start with the voltage scale higher than 12vdc and move voltage scale down in steps for each pin. Any voltage is a bad regulator.
3. On the other part of the disconnected regulator plug. Set the multimeter for Ohms x1 scale and measure for resistance across the pins of the stator. You should read something around 0.1 to 0.2 ohms for a 32 amp system.
4. Then check for continuity between each pin on the plug and frame/engine ground. The meter needle should not move (infinite resistance)(digitals will show infinite resistance) if the meter needle does move (indicating continuity)(digitals will show some resistance), recheck very carefully. If the meter still shows continuity to ground the stator is shorted (bad).
5. Set the meter to read A/C volts higher than 30 volts (the scale setting for voltage should always be higher than the highest voltage you expect or you may fry the meter). Start the bike, and measure from one pin to the other on the plug (DO NOT cross the multimeter probes! - touch them to each other). You should read roughly 16-20 vac per 1,000 rpm.
6. If the battery was good under load test, if the stator is NOT shorted to ground, and the stator is putting out A/C voltage, then the regulator is bad (most likely even if passed step 2)
For more information about your question and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.ifixit.com/Answers/View/486385/Battery+not+charging+and+tested+stator+and+rectifier+regulator
How to Fully Troubleshoot Your Motorcycles Charging System MotorcycleMD
https://www.tradebit.com/filedetail.php/278345166-1979-1985-suzuki-gs250-gsx250-gsx400-gs450-twins $15
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 15, 2019


Hi, Julian_taylo for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://tirepressure.com/suzuki-gn-125-motorcycle-tire-pressure
https://www.kiwibiker.co.nz/forums/showthread.php/134161-Tyre-pressure-for-GN125
Suzuki GN125F Service Manual
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 15, 2019


Hi, Savher for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+Suzuki+Raider+junior+Pro&tbm=isch&source=univ&sa=X&ved=2ahUKEwiOjvjS4Z3iAhUNQK0KHWRnAbgQsAR6BAgIEAE&biw=1440&bih=757
Suzuki Motorcycle Wiring Diagrams
https://www.courtesyautosalesprescott.com/suzuki_raider_j_engine_manual_download.pdf
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 15, 2019


Hi, Claude111 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.reddit.com/r/Fixxit/comments/7w9n4g/help_me_diagnose_the_idlechoke_problems_on_this
How to diagnose carburetor vacuum leaks on your motorcycle
http://gsarchive.bwringer.com/mtsac/~cliff/storage/gs/80-83_GS1100T-LT-EX-1000SZ-EZ-SD-ED-ESD.pdf
https://www.partsfish.com/oem-parts-for-suzuki
Suzuki GS1100E Owner Manual

Suzuki... | Answered on May 15, 2019


Hi, Poppin1100 and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. A faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Faulty run/off switch
11. Tilt sensor needs a reset.
12. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.gixxer.com/forums/16-water-cooled-gixxers/236184-1995-gsxr-1100-no-spark.html
How to diagnose no spark situation on motorcycle
https://www.tradebit.com/filedetail.php/275705393-suzuki-gsxr1100-gsx-r1100-1993-1998-repair-service-manual $15
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 15, 2019


Hi, Peterdawson4 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://advrider.com/f/threads/bandit-1250-cam-chain-tensioner.461686
https://www.youtube.com/watch?v=dnsNz-pkkj0
https://www.manualslib.com/manual/826775/Suzuki-Gsf1250.html#product-GSF1250A
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 15, 2019


Hi, Rpbpaving for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+2002+Suzuki+SMX+50&tbm=isch&source=univ&sa=X&ved=2ahUKEwioiJSFwZ3iAhXDTN8KHaZYCdQQsAR6BAgJEAE&biw=1440&bih=757
Suzuki Motorcycle Wiring Diagrams
https://www.slideshare.net/DanialSummerlin/suzuki-smx50servicemanual
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 15, 2019


Hi, Lfd322 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://advrider.com/f/threads/suzuki-mt50-trail-hopper-what-oil-to-use.474981
https://www.google.com/search?q=Oil+type+1972+Suzuki+MT50+Trailhopper&tbm=isch&source=univ&sa=X&ved=2ahUKEwiukf7hlJviAhURRKwKHTfNDgcQsAR6BAgJEAE&biw=1440&bih=757
http://wpa.mofga.org/suzuki_mt50_manual.pdf
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 14, 2019


Hi, Anonymous before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.doityourself.com/forum/motorcycles-snowmobiles-go-carts-motorized-bikes-atvs-electric-mobility-scooters-golf-carts/231365-suzuki-gs1000-wont-start.html
https://www.ar15.com/forums/general/interesting_problem_on_an_old_bike___suzuki_gs1000__1978_/134-1476291
Suzuki GS1000 Service Manual
https://www.partsfish.com/oem-parts-for-suzuki
http://gsarchive.bwringer.com/mtsac/~cliff/storage/gs/GS1000G_Owners_Manual_80.pdf

Suzuki... | Answered on May 14, 2019


Hi, Anonymous before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://burgmanusa.com/forums/14-burgman-400-1999-2006-model-years/48429-won-t-start-engine-will-not-turn.html
What To Do If Your Motorcycle Doesn Start
https://www.croooober.com/en/item/3878013/Other-Accessories/SUZUKI-Skywave-250-Service-Manual
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 14, 2019


Hi, Jesseok580 before testing any electrical component in the Turn Signal Light Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have 12.5 volts or more but little or zero amps causing the battery to be faulty and must be replaced, "AGM" batteries fall into this category more so than lead-acid types, also before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced your OEM lights with one or all LED lights you are going to need a load equalizer.
If no turn signals are working the cause could be a faulty turn signal module/flasher or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion.
If your turn signal comes on but takes several seconds before it starts flashing you may have dirty contacts in the turn signal switch/button, the switch needs to be opened up and cleaned also the flasher may be starting to fail. It should be noted that cold weather will only exacerbate the situation especially when temperatures drop down below freezing and the location of the component, turn signal switches on the handlebar are at the mercy of the oncoming freezing 70 mph wind and makes it hard for the contacts to do their job covered in frozen grease/grime
If all four turn signals flash at the same time like hazard lights even though you only pressed one turn signal button then you have a LED light in the circuit and need a load equalizer that can be purchased from any motorcycle parts supplier.
If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function.
If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction.
If your rear turn signals don't work check your rear fender wiring harness connector first, look for, corroded, broken, loose pins/sockets, power, and a good ground, the harness connector is usually located under the seat on the front of the rear fender then keep tracing the wiring look for obvious harness damage caused by the rear tire.
If you still can't find the malfunction backtrack from the rear fender wiring harness connector.
If one side does not work you could have a faulty turn signal switch or module check for continuity.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Left+turn+signal+not+working+1978+Suzuki+GS1000&tbm=isch&source=univ&sa=X&ved=2ahUKEwju0ITh6JriAhXBnOAKHRysD0EQsAR6BAgJEAE&biw=1440&bih=757
Troubleshoot Repair motorcleTurn signal light
Suzuki GS1000 Service Manual
https://www.partsfish.com/oem-parts-for-suzuki
http://gsarchive.bwringer.com/mtsac/~cliff/storage/gs/GS1000E_Owners_Manual_79.pdf

Suzuki... | Answered on May 14, 2019


Hi, Scott for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+1984+Suzuki+RM80&tbm=isch&source=univ&sa=X&ved=2ahUKEwiD-8DnyJriAhVNTd8KHT3TAbMQsAR6BAgJEAE&biw=1440&bih=757
Suzuki Motorcycle Wiring Diagrams
Suzuki RM85 Owner Service Manual
https://www.partsfish.com/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Suzuki... | Answered on May 14, 2019


Hi, Autowise for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere $19 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.youtube.com/watch?v=3PbybnbB-So
How to adjust Valce Clearance 1985 Suzuki GS400
https://www.tradebit.com/filedetail.php/280105158-suzuki-gs250-gsx250-gsx400-gsx450-twins-motorcycle $19
https://www.partsfish.com/oem-parts-for-suzuki
http://gsarchive.bwringer.com/mtsac/~cliff/storage/gs/GS450GA_Owners_Manual.pdf

Suzuki... | Answered on May 14, 2019

Not finding what you are looking for?
2007 Suzuki RMZ 450 Logo

Popular Tags

11 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5962 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

XTC 125 Suzuki

  • XTC 125 Suzuki

Most Popular Question

suzkie rmz 450 fuel injection starts

  • Motorcycles
Loading...