20 Most Recent 2008 Harley Davidson FXD Dyna Super Glide - Page 6 Questions & Answers

0answers
0answers

Po 188

Be the first to answer 5/11/2015 3:08:50 AM • Harley Davidson... • Posted on May 11, 2015Be the first to answer
0answers
0helpful
1answer

2004 Super Glide cuts out

you don't say how long you are riding before it dies on you but sometimes if have gotten dirty gas or other contaminants in the tank they will clog the fuel filter, then after the bike sits a bit it will restart until these contaminants again clog up the filter.
empty your tank and clean or replace the filter

hope this helps
5/5/2015 7:33:17 PM • Harley Davidson... • Answered on May 05, 2015
0answers
0helpful
1answer

Can onlyget 5&6 gear

shifting fork is bent or broken in the transmission
2/15/2015 11:10:53 PM • Harley Davidson... • Answered on Feb 15, 2015
0helpful
1answer

Why does my 2005 harley dyna superglide will start off choke but runs rough and will not idl

I'm thinkin" you might have bad plugs & or bad gas
2/3/2015 3:49:11 PM • Harley Davidson... • Answered on Feb 03, 2015
0helpful
1answer

2003 dyna low rider, no speedometer, odometer and fuel gauge not working

check your fuses
1/5/2015 3:59:49 PM • Harley Davidson... • Answered on Jan 05, 2015
0helpful
1answer

Why won't my headlight work on dim?

What did you do with the handlebars and wiring etc. and did you have the clutch perch and switch assembly open or off. Likely you have a pinched wire.
11/26/2014 5:16:48 AM • Harley Davidson... • Answered on Nov 26, 2014
0helpful
1answer

I am trying to find

Connector 7 is under the seat. It is the main harness to tail lite connector. The wires from main connector are: 2002 All DOM and INT Including FXDWG Connector 7 pin 1 goes to tail lite 94 connector pin 2 = BW pin 2 goes to 94 pin 1 = O/W pin 3 goes to 94 pin 5 = V pin 4 goes nowhere = empty pin 5 goes to 94 pin 6 = BK pin 6 goes to 94 pin 4 = R/Y pin 7 goes to 94 pin 3 = BE pin 8 goes nowhere = empty Connectors 93, 94, 18, 19 are all in the tail lite assembly. 19 = Rt Turn pin 1 = V/BN pin 2 = BK 18 = Lt Turn pin 1 = V/BN pin 2 = BK 93 = Brake and running lites pin 1 = BE = Dom running pin 2 = O/W = HDI running pin 3 = R/Y = Brake pin 4 = BK = ground
11/16/2014 3:18:16 AM • Harley Davidson... • Answered on Nov 16, 2014
0helpful
1answer

Wat is harley davidson code

First of all you ALWAYS need to and should post the year of you bike even though codes do not change from year to year. B1004 = priority 10 , Fuel level sending unit low
11/16/2014 2:42:16 AM • Harley Davidson... • Answered on Nov 16, 2014
Not finding what you are looking for?
2008 Harley Davidson FXD Dyna Super Glide Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

FXD Dyna Super Glide Harley Davidson

  • FXD Dyna Super Glide Harley Davidson

Most Popular Question

hear light pinging

  • Motorcycles
Loading...