20 Most Recent
2009 Bajaj Pulsar 200 DTSi Questions & Answers
Valve clearance
you can get a workshop manual here
http://www.bcmtouring.com/imp/Pulsar_DTSi_Workshop_Manual.pdf
Can you tell me about the standard adjustment for
There is only one mixture screw, it is the bronze colored screw on the left hand side of the carb.
Turn left to rich the mixture, turn right to lean it. "Standard settings" is 1 1/4 to 2 1/14 rounds out from a soft seat. (depending on altitude)
I recommend learning how to read your spark plugs for the best possible mixture settings. Remove both of the plugs and check their
electrodes for color.
If its more on the light brownish side your bike is running
on leaner mix if its way too much black your bike is running on rich mix. So
ideally it should be dark-brown(almost black but not black!).
Good luck, i hope this helps.
Circuit diagram of bajaj pulsar
Search "wiring diagram bajaj pulsar 200". You'll get lots of hits. Try selecting one of the diagrams shown. Double tap it, then view image.
Dipper switch not working ,only headlight is
are you sure that the bulb is ok as it has two filaments in it and one can blow and the other can still be fine this is very common,check the bulb before you do anything else.
7/29/2021 10:51:15 AM •
Bajaj...
•
Answered
on Jul 29, 2021
Not finding what you are looking for?