20 Most Recent 2009 Suzuki Boulevard C50 Questions & Answers


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=2009+Suzuki+Boulevard+C50+fuse+box+location&tbm=isch&source=univ&sa=X&ved=2ahUKEwjh7MK91MjgAhWOpFkKHfJbCTsQsAR6BAgBEAE&biw=1440&bih=757
Suzuki Boulevard C50 Fuse Location
Suzuki Boulevard C50 2001 2009 Service Repair Manual Download Manuals... $15
https://www.partsfish.com/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2009 Suzuki... | Answered on Feb 19, 2019


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
remove passenger pegs Suzuki Volusia Forums Intruder Volusia and Boulevard...
Suzuki Savage S40 Remove Seat Rear Fender Passenger Pegs
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2009 Suzuki... | Answered on Sep 27, 2018


Hi, Anonymous and the usual suspects are:
1. Shifter pawl improperly adjusted.
2. Shifter drum improperly adjusted or damaged.
3. Shifter engaging parts/dogs badly worn or rounded.
4. Shifter forks bent.
5. Damaged gears.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Motorcycle transmission occasionally pops out of gear
popping out of first gear Suzuki Volusia Forums Intruder Volusia and...
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2009 Suzuki... | Answered on Sep 25, 2018


Hi, Erika before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter motor or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. Faulty ignition relay.
14. The electric starter is working but starter clutch has failed.
15. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2005 C50 won turn over FOUND THE PROBLEM Suzuki Volusia Forums Intruder...
2006 Boulevard will not start
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2009 Suzuki... | Answered on Sep 24, 2018


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to Change Your Coolant Suzuki Volusia Forums Intruder Volusia and...
Suzuki Boulevard C50 2007 Coolant Exchange
Suzuki 2005 VL800 Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
https://suzukiboulevard.weebly.com/uploads/1/2/8/6/12861853/suzuki_c50_owners_manual.pdf

2009 Suzuki... | Answered on Sep 24, 2018


Hi, Mike and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Quick disconnect check ball stuck.
14. Compression below 75 PSI.
15. A stuck-bent-burnt valve.
16. Improper valve clearance (too tight)
17. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
18. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
19. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
20. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections are loose or connected to the wrong cylinders.
21. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
22. Faulty neutral, clutch, kickstand safety switch.
23. Faulty fuel pump or fuse or relay.
24. Faulty or corroded run/stop switch.
25. Tilt sensor needs a reset.
26. Security system not disarming alarm needs a reset.
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
c50 will not start
Bike cranks but won start Suzuki Volusia Forums Intruder Volusia and...
Suzuki VL800 Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
Suzuki VL800 Owner Manual

2009 Suzuki... | Answered on Jul 28, 2018


try taking apart assembly maybe you will be able to see a fault

2009 Suzuki... | Answered on May 28, 2016


Jump out the wires on the kick stand, to make the determination.

2009 Suzuki... | Answered on Aug 26, 2014


check the kill switch plus side stand switch.

2009 Suzuki... | Answered on Jun 13, 2014


Did you forget to reinstall the bering spacer? did you seat the bearings all the way? did you install the speedometer drive correctly? is the tire rubbing on the fender?

2009 Suzuki... | Answered on Oct 29, 2012


Google (Suzuki)(C50)(manual) without parens. You may have to refine your search to get a manual for 2006.

Suzuki Boulevard... | Answered on Jul 09, 2018


check the block under rear seat a white one small 2 wires in it, short them with a hair clip or fuse wire turn ignition on see what comes up on dash

Suzuki Boulevard... | Answered on Jan 06, 2018


Hi, Steve for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How to Read Factory ECU Codes FI C12 Suzuki 90 Crankshaft Position Sensor
SUZUKI MOTORCYCLES FAULT CODES
99500 38047 03E pdf service manual "FREE"
OEM parts for Suzuki
99011 43H50 03A pdf owners manual "FREE"

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Suzuki Boulevard... | Answered on Mar 09, 2017


Hi, Loki for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
99500 38047 03E pdf free service manual
OEM parts for Suzuki
99011 43H50 03A pdf free owners manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Suzuki Boulevard... | Answered on Jan 06, 2017


Hi, Michael most definately and the usual suspects are:
1. Oil tank/pan overfilled.
2. Restricted oil return line to oil tank/pan.
3. Restricted breather operation.
4. Restricted oil filter.
5. Piston rings badly worn or broken.
6. Valve guides are worn and or seals worn, crushed, missing, or have come of guide and is pumping oil through the valve guide.
7. O-ring damaged or missing from oil pump at crankcase junction (also results in poor engine performance). For more information about your issue, please visit the websites below. Good luck and have a nice day.
problem c50 blue smoke Suzuki Volusia Forums Intruder Volusia and...
50 Blue Smoke From Pipes
99500 38047 03E pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Suzuki Boulevard... | Answered on Jan 22, 2016


Hi, Johnos for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
False Swing Arm Removal Instruction Suzuki C800 C50
Left swingarm fake
99500 38047 03E pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Suzuki Boulevard... | Answered on Jan 01, 2016


might be best to replace em

Suzuki Boulevard... | Answered on Sep 08, 2014


The large wire to the starter from the battery is corroded at the starter terminal, or the large earth wire is not clean.

Suzuki Boulevard... | Answered on Sep 01, 2014


clean air filter and carburetor put new spark plug in

Suzuki Boulevard... | Answered on Aug 28, 2014

Not finding what you are looking for?
2009 Suzuki Boulevard C50 Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Boulevard C50 Suzuki

  • Boulevard C50 Suzuki

Most Popular Question

2009 c50 boulevard fuse box location

  • Motorcycles
Loading...