20 Most Recent
2010 Husqvarna TE 450 Questions & Answers
Adjust the valve clearance on TE450
I don't believe so. You'll need to order a shim kit and use a feeler guage. I had an SMR510. Once I determined the clearance needed I would select the proper shim and use a little grease on the feeler guage to slide it in under the rocker arm.
Bike stalled, tried to re-start
What is year and model? Has the battery been checked for proper ampere and voltage output? Do the lights come on or other accessories? Kick starting I'm assuming is difficult to say the least. What year and model, and any other info about the bike would help.
I have an TE-450 2010
No, best way to lower your bike is to send the forks and shock to a reputable suspension shop and ask them to install spacers inside the forks and shock which will reduce the length without changing the damping. This modification is easily reversable if you decide to put the bike back to full height.
Try Enduro Engineering or Factory Connection or .... there are many others out there.
Need to know how
120mm fork oil level , 5w oil,or 7 to 10w for heaver rider 80 kgs plus
My front fork seals need
forks need to be removed,and disasemble,and cleaned,new fork seals,reasembleb fit new seals, refit damping cartridge,fill fork with 5w fork oil upto 120mm from top,refit spring, refit fork cap
I have trouble fixing the
Hello
What exactly is the problem, i am searching for instruction diagrams but need to know where exactly the problem comes in. Just post a comment and i will come back to you as soon as possible.
Kind regrds
AndreA
2006 Husqvarna TE-610 only has intermittent spark one.
If you have already replaced the flywheel, stator, and CDI, the next step would be to check the ignition coil and spark plug. It is possible that the ignition coil is faulty and needs to be replaced. Check the spark plug for any damage or wear and replace it if necessary. Additionally, make sure all the wiring connections are secure and free of corrosion.
If none of these steps fix the issue, it may be best to take the bike to a mechanic or dealer for further diagnosis. They may be able to identify any other potential problems that could be causing the intermittent spark issue.
3/5/2023 9:12:58 AM •
Husqvarna...
•
Answered
on Mar 05, 2023
K970 won't start after rebuild
My first thought is that is the primer bulb in the right way round as effectively, it is a one way valve New bulbs also fail to work properly. I reckon that is why they come in packs of 10 :>D Take it off, connect it to fuel and make sure it pumps.
Also please note that we are not Husqvarna, we just have the category for easy filing.
11/29/2021 11:01:56 PM •
Husqvarna...
•
Answered
on Nov 29, 2021
Husky wr 250 wiring diagrams 1995 model
Most likely it will be the stater. And they are pricey. Coils hardly ever go bad or the only other thing that would cause a no spark problem could be the kill button. I hate to say it, but i think it will be the stater.
4/2/2019 12:32:00 PM •
Husqvarna...
•
Answered
on Apr 02, 2019
Husqvarna Z turn changed the rectifier and the battery and something is still killing the battery
Ok.. The rectifier only changes AC voltage to DC voltage.. the voltage to charge the battery comes from the generator.
With the engine running at half throttle+, and IN NEUTRAL, check the voltage at the battery terminals it should be 13 volts +. If you are not getting at least that much.. make sure all connections are tight.. if its less than 13V..... more checking is indicated. (Shop time)..sorry...
6/13/2017 11:52:58 PM •
Husqvarna...
•
Answered
on Jun 13, 2017
Not finding what you are looking for?