2003 Hartford HD-150S - Answered Questions & Fixed issues


you need a micrometere or vernier caliper to measure how thick they are that how you tell how worn the clutch is. the manual will list the specificational limit (how thin you should allow them to get and how do the basket and innser hub looks like). if they have small teeth on them they are worn.,

2003 Hartford... | Answered on Nov 10, 2008 | 121 views


Hi, Unstable before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://advrider.com/f/threads/hartford-vr-150-question.1054495/
https://www.lifewire.com/fix-non-working-headlights-4137021
https://www.manualslib.com/manual/825652/Hartford-Cg-125.html
https://www.cgmoto.com/motorcycle-parts-HARTFORD-150-VR-150-H-X-Z-2004.html
https://www.motorcycle-manual.com/hartford/

Hartford... | Answered on Oct 28, 2019 | 24 views


why make multiple posts of the same question????
i answered this already its down for reserve and up for main

Hartford... | Answered on Dec 06, 2014 | 113 views


Hi, Anonymous you need to repost your question under the ATV category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 2 days ago | 15 views


Hi, Yunok you need to repost your question under the Electrolux category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 2 days ago | 13 views


Made in China, no parts available, no maker company, no service. $48 new, break and replace :>(

The only parts you would be able to replace is a generic battery and charger.

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ACYBGNQLWSc3It9wbGMpTDNrDf4A3U2-Ug%3A1579120172605&ei=LHYfXtnHJIyqtQWPt7agBg&q=Kids+Motorz+6v+motorcycle+80-KB901G+parts

Motorcycles | Answered 2 days ago | 16 views


Which Moto?
Lesvos-rentals.com

Motorcycles | Answered 2 days ago | 17 views


Hi, Steven you need to repost your question under the Polaris Snowmobile category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 3 days ago | 13 views


Hi, Andre you need to repost your question under the Peugeot Car category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 3 days ago | 17 views


It takes the alternating current from the Alternator (generator) and turns it into 12 volts DC (direct current - no waveform) to charge your battery.

Motorcycles | Answered 3 days ago | 17 views


Hi, Jeremy parts swapping is common with most motorcycles when it comes to interchangeable or compatible parts from one model with another "EXCEPT" for the CDI's they are year-make-model "SPECIFIC" the best thing to do is call your local Dealership Parts Department or a reputable independent shop. If your location is not near a shop then go online and find a parts catalogue or "FICHE" and match part numbers depending on your criteria.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Speedometer+2008+Yamaha+FZ6R&sxsrf=ACYBGNQgTBlkeJIHDHHOB1qpGx2oRyOajg:1579033866795&source=univ&tbm=shop&tbo=u&sa=X&ved=2ahUKEwiVwN_F94PnAhWQwFkKHY2yCT4Qsxh6BAgNECw&biw=1440&bih=757
https://www.jpcycles.com/yamaha-fz6r-dash-and-speedometers
https://www.manualslib.com/manual/761240/Yamaha-Fz6rc.html
https://www.partsfish.com/page/oem-parts-for-yamaha
https://ownersmanuals2.com/yamaha/fz6-shg-2008-owners-manual-55469

Motorcycles | Answered 3 days ago | 13 views


The vac line will connect to the inlet tract on the carb

Motorcycles | Answered 3 days ago | 12 views


The first thing to check is the battery, read the voltage with a multimeter, a battery in good condition and fully charged should read as 12.6 volts + anything less than 12 volts and the battery is u/s

Motorcycles | Answered 3 days ago | 17 views


Hi, Anonymous you need to repost your question under the Camcorder category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered on Jan 12, 2020 | 14 views


Hi, David for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ACYBGNS9mokaQ3e-qk_4ofUU_XqHPofd-Q:1578871019907&q=Fuse+box+location+2015+Yamaha+Zuma+50&tbm=isch&source=univ&sa=X&ved=2ahUKEwixpabymP_mAhXtzVkKHWETBg8QsAR6BAgJEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=ylHpV83_2BA
https://www.manualslib.com/manual/462324/Yamaha-Yw50ap.html
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.manualslib.com/manual/196522/Yamaha-Zuma-Yw50t.html

Motorcycles | Answered on Jan 12, 2020 | 14 views


Hi, James you need to repost your question under the Bruno Lift category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered on Jan 12, 2020 | 15 views


Hi, Chad for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.whitedogbikes.com/whitedogblog/yamaha-sr250-se-239cc-4-stroke-specs-and-info/
https://www.jpcycles.com/1981-yamaha-exciter-sr185/oils-and-chemicals
https://www.classiccycles.org/1852/1936.html
https://www.partsfish.com/page/oem-parts-for-yamaha
http://mybikemanuals.com/yamaha/

Motorcycles | Answered on Jan 12, 2020 | 12 views


Hi, Isabel and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low or too high.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
13. Faulty auto choke or wiring connection.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
https://www.hdforums.com/forum/exhaust-system-topics/355540-won-t-idle-without-choke-out.html
https://www.youtube.com/watch?v=pHLOHYvZ0Zg
https://carlsalter.com/harley-service-manuals.asp
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://serviceinfo.harley-davidson.com/sip/service/document/6300?highlight=1998+sportster+owner
https://www.6ya.com/how-6ya-works $6

Motorcycles | Answered on Jan 12, 2020 | 13 views


Here is the link for reading or download.

Motorcycles | Answered on Jan 12, 2020 | 18 views

Not finding what you are looking for?
2003 Hartford HD-150S Logo

Popular Tags

2 questions posted

Ask a Question

Usually answered in minutes!

Top Hartford Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Brad Brown

Level 3 Expert

18136 Answers

Fahr Quad

Level 3 Expert

752 Answers

Are you a Hartford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...