20 Most Recent 1984 Honda CBX Questions & Answers


The Bike Technicians Tactic

Phase1

An electrical inspection on the bike should produce results. First, the bike battery powers the entire lightening systems mentionable as ignition, meter readings, head lamps, signal indicators. However, the battery provides the power supply to several entities though also significant is the fuse box containing circuit protection coils. Inserting the bike key into the ignition to perform start mode displays the capacity power circuits. A charged battery should display an indication in the meter reading area also known as bike dashboard grading. A malfunctioning start mode on inserting key in ignition may be traceable several locations on the electrical circuits. Attempting to repair the electrical power of the bike usually requires batter power power test kit. The test kit ascertains the battery power making possible progress to the remaining electrical circuits. Test kit also ascertains the fuse box circuit functionality either with fuses still intact or extracted allowing for the next progress level. An observation tour of the bikes electrical wiring kits from battery hold through fuse box compartments to each lightening display area either headlamps, indicators, and meter reading should produce results of any visible damages that may require repairs after the electrical inspection has been performed. Once any faults were observed on the electrical channels, repair mode is the next level. A dull battery either may have been depleted completely of durational capacity requiring another for replacement. Alternately, a depleted power supply due to prolonged storage may require charge functionalities. Usually, a device capacapble of restoring a battery of electrolytes is resorted for charger ability. The type of battery may require constuents either liquid cathode replenishment in the battery entrapment area prior to charging feature is assumed with electrolyte machine. Once the battery has regained full functionality makes way the next repair task. The fuse box may have simply required replacement fuses either as missing or burnt out. A fuse box usually contains additional spare for replacement functionalities. An alternate arrangement at acquiring fuses on the auto mart may replace the burnt devices. The next electrical task is wiring fixtures achievable by mending broken cords with appropriate electrician's tapes else malfunctions may remain. Alternately, a worn-out electrical wire is replaceable by acquiring the entire extension lengthwise between significant areas. The last remaining electrical units are lightening indicators consisting of bulbs or luminescent displays reflectors. Observe the blub areas either by loosening covers to inspect for observable burnouts else the entire electrical circuitry is ready for functionality observations with separate entities.

Engine Technicians Tactic

PHASE 2

A bike engine inspection includes observation for indications of malfunction. Any fluid residue is indication of problem areas. Where oil leaks usually requires engine block inspections. A bike engine consists of an entrapment compartment where mechanical combustion takes place. First, the entire observable block consists of an external coating known as engine bloc housing internal component of pistons, rings, and fastens known as cylinder heads. A bike engine has every component embedded within requiring technical expertise to achieve an inspection. Once deciding on the engine task requirements, acquire a tool box with the appropriate componements as first requirement before engine works is commence able. Second, the bike may require an area environment as workshop requirement to attain engine inspections. Third, bike engine are least bulky compared with vehicle engines however assistance would complement the inspection phase. Prior to inspecting the bike engine, a strap mechanism has to be assumed to achieve expert maneuverability also as safe precaution. Unless parts hinder maneuverability at engine locations, the only removable components should be the engine. First, start with disjointing the spark plug cables to acquire accessibility to plugs imbedded on the cylinder heads. The plugs require tools to loosen thereby exposing the combustible area. Once the spark plugs are exposed, two alternatives are likely. First, a spark plug may have gathered rust residue only requiring cleaning to attain regular capacity. The pin area of the spark plug may have been twisted due to overheating and slight melting dislocation. Usually cleaning the residue from old plugs may simply expose the ignitable capacities. However, an observation of twisted plug pin may require twisting back in place to achieve full ignitability once bike engine starts. A bike engine bloc has the pistons as combustibles or blasters of fuel gasoline. The rings perform as strap fasteners whenever the pistons move about combustibility. Usually, the engine entrapment components would have collected residue requiring clearing. Also, pistons together with rings may require replacements either as worn-out due to prolongs tasks or overexerted biker features.

1984 Honda CBX | Answered on Feb 25, 2011


normaly tensioner wears first. i would replace both to ensure you dont have do the job again when the chain goes beyond its wear limits

1984 Honda CBX | Answered on Oct 08, 2010


helminc.com sells Honda manuals

1984 Honda CBX | Answered on Jul 21, 2010


Call Valley Cycles 818-993-8640 they might be able to help. Chaz Moto DC

1984 Honda CBX | Answered on Jan 22, 2010


With both of your questions the parts book is a recomendation for a specific condition. If you have 410's now and the spark plug looks like it's burning a nice caramel brown then you are fine. If the spark plug looks like it's burning white you need even bigger jets, if you are burning black then you need to go smaller. Always change them by one or two sizes and check again. As for the weights, the different weights change shift points of the clutch a heavier weight would cause the primary clutch to engage at a different rpm, I am in a stage of trial and error on which ones to use to make the clutch shift when and how I want it to.

1984 Honda CBX | Answered on Dec 30, 2009


Turn the throttle screw and the air screw all the way in until they LIGHTLY seat. Now back both of them out one and one half turns. This is the factory setting.

1984 Honda CBX | Answered on Oct 22, 2009


If you know that the engine is good, then it is better to replace the tensioner.
If you are not sure about engine condition, then replace engine.

to replace the tensioner you will need to take off the
cover. Remove engine sprocket.
Undo the primary chain and clutch assembly alltogether.
Undo the starter bolts and jackshaft.
Replace the tensioner.

The job is pretty much similar to replacing the drive belt.

see also Replace Motorcycle Drive Belt Removed Cover Photo


Better doing the repair with the aid of a workshop manual, like the ones below:


HONDA CB750 NIGHTHAWK FACTORY SERVICE REPAIR MANUAL 1979-1984 .

Honda CB750, CB900 DOHC Fours 1978-1984 repair manual by Haynes

1984 Honda CBX | Answered on Sep 14, 2009


have you adjusted your valves that is what it sounds like to me

1984 Honda CBX | Answered on Aug 22, 2009


The carbs may just be out of sync, I would recomend takeing them to a local shop and haveing them checked out completly.

1984 Honda CBX | Answered on Mar 12, 2009


Hondalube GN-4 any Honda dealership

1984 Honda CBX | Answered on Dec 15, 2008


If your motorcycle has a center stand, use it for long term storage. If you're not riding for several weeks and don't have a center stand, you may want to consider carefully propping up the bike using blocks. Don't do more harm than good by dropping your bike while attempting to prop it up! If done correctly, lifting your motorcycle will alleviate stress on the suspension and tires. Inflate your tires to the maximum recommended pressure will maintain their shape, since cooling temperatures will make the pressurized air contract. If the ground might potentially freeze, try to keep the tires off the ground using wood blocks.

1984 Honda CBX | Answered on Nov 10, 2008


Hi, Sean parts swapping is common with most motorcycles when it comes to interchangeable or compatible parts from one model with another except for CDI's they are year-make-model specific the best thing to do is call your local Dealership Parts Department or a reputable independent shop. If your location is not near a shop then go online and find a parts catalog or "FICHE" and match part numbers depending on your criteria.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://lainefamily.com/images/HondaCBXShopManual.pdf
https://www.partsfish.com/page/oem-parts-for-honda
HONDA CBX 1000 OWNERS MANUAL PDF PDF Book Mediafile Free File Sharing
Honda CBX1000
Honda CBX Wikipedia

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Honda CBX... | Answered on Dec 16, 2017


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
The International CBX Owners Association
http://www.cbxclub.com/protect/valve.pdf
http://www.lainefamily.com/images/HondaCBXShopManual.pdf
https://www.partsfish.com/page/oem-parts-for-honda
1979 Honda CBX Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Honda CBX... | Answered on Oct 24, 2017


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Honda CBX 1000 engine number location Google Search
The International CBX Owners Association
http://www.lainefamily.com/images/HondaCBXShopManual.pdf http://www.partsfish.com/page/oem-parts-for-honda
1979 Honda CBX Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Honda CBX... | Answered on Oct 22, 2017


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1979 Honda CBX 1000 engine number location Google Search
The International CBX Owners Association
http://www.lainefamily.com/images/HondaCBXShopManual.pdf http://www.partsfish.com/page/oem-parts-for-honda
1979 Honda CBX Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Honda CBX... | Answered on Oct 13, 2017


teamrc17.net/file_download/6/Owners_Manual.pdf

go to this site and u will get the users manual of honda cbx

Honda CBX... | Answered on Jun 04, 2011


I have both a CBX 1000 6 Cyl and a CBX 550 F2 and both tanks are Steel ( My bikes are both UK Spec but I dont think Honda changed the tanks for other countries)

Honda CBX... | Answered on May 06, 2011


I'm thinking that has front brakes. If there is a cable running to hub from handle bars, then yes. Also, look for an arm sticking out from side of center hub that may have had a brake hooked up if no cable from handle bars. Rotating that slightly one way or the other should release brakes, and apply them the other way. If that doesn't work and the linkage (arm) is there for brakes, you may have to pull front wheel and pull it apart to fix.

Honda CBX... | Answered on Apr 15, 2011


Hi.

I have the German version of the workshop manual. I am still uploading the file. I will be able to post the link in about 20 minutes.

The English version of the manual is available for purchase here.

Regards.

Ginko.

Honda CBX... | Answered on Jan 17, 2011


http://www.babbittsonline.com/motorcycle-parts-for-sale They sell only original equipment parts, not after market parts.

Honda CBX... | Answered on Dec 23, 2010

Not finding what you are looking for?
1984 Honda CBX Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1985 Honda CBX
1985 Honda CBX

-20 Questions

1979 Honda CBX
1979 Honda CBX

-6 Questions

1981 Honda CBX
1981 Honda CBX

-3 Questions

1982 Honda CBX
1982 Honda CBX

13 Questions

1980 Honda CBX
1980 Honda CBX

0 Questions

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6103 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

richard libby

Level 2 Expert

209 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

CBX Honda

  • CBX Honda

Most Popular Question

get workshop manual cbx 750

  • Motorcycles
Loading...