20 Most Recent 2000 Husaberg Fe 501 e SM Questions & Answers


GET A MAINTENANCE MANUAL SPECIFICALLY FOR YOUR BIKE. I faced the same issue on my 04 Shadow. First, Check for the faithful triangle for internal combustion engines. Check the adjustment on your carb idle screw. All the way in, 21/2 to 31/2 turns out. If it's already good, don't mess with it yet. Ask yourself the three questions. Is there fuel present? Is there a clean air filter installed? Is there a good spark coming from your spark plug? Start looking in the area where you scratch your head or say "I don't know". Now, close the fuel petcock on your tank and remove the tank. Empty your tank into a clear container that can handle gasoline. I use a large pickle jar. Inspect the gas for water, little blobs etc. Anything that is not gas, is not good. It should be relatively clear. No heavy coloring. Could be the old gas in a jerry can has lost it's volatility. Also, gas left in the fuel cell can varnish and close important passages like carb needles, injectors etc. Clean out your fuel petcock. That means completely disassemble the valve on the petcock and lightly scrub it's interior with a small bristle brush, nothing metal. You might have a spring and steel bearing inside the petcock so be mindful as you disassemble it. After you brush out the valve, rinse it in fresh gas and reassemble it. Now, put fresh ake sure there is gas getting to the carb. If you have a mesh fuel filter in your tank, make sure it's not clogged. You may have a bowl screw on your carb. Open it and see what you get. If you have a mesh filter in your carb, make sure it's not clogged. If there is water/debris/rust etc in the fuel tank? You may have inadvertently loaded your carb with other than clean fresh gas. Put everything back together aftercleaning it out and give it a go. Good Luck! Let me know how it works out.

2000 Husaberg Fe... | Answered on Aug 20, 2011


Go to www.husaberg.com
Select "service", then "downloads", and look for your year, and the type of information you need.

2000 Husaberg Fe... | Answered on Oct 12, 2010


starter gear maby wornor jamed tooth to tooth

2000 Husaberg Fe... | Answered on Apr 03, 2010


I would suspect a damaged float in your carb. Probably has a leak in it and as a result, it 'sank' and will not shutd off when the bowl is full.

Replace the carb or rebuild with a kit that includes a new float and main valve.

2000 Husaberg Fe... | Answered on Sep 28, 2009


Put it up on your stand lossen the axel and remove the bolt on the bottom of the shock. Then tighten your chain and lift your swingarm up until its horizontal with the ground, then the chain should have almost no play. Not completely tight, but almost no play. Tighten the axel, and the bolt on the shock, and your set,,,

2000 Husaberg Fe... | Answered on Nov 10, 2008


and when the forks/bars/tripleclamps are straight the wheel goes towards the right. ii think they are twisted or bent. how much do new forks cost?Loosen your front wheel slightly. Loosen your fork clamp bolts on the triple clamps slighty. Hold the front brake lever. Put one leg on either side of the front wheel to keep it from moving. Use the handlebars to turn the front end back straight. Tighten everything back up using a torque wrench and torqueing to the proper values from your service manual. Go ride and have fun. ,

2000 Husaberg Fe... | Answered on Nov 10, 2008


Backfires are when fuel travels through the cylinders without combusting then explodes in the exhaust pipe. Fuel supply/combustion issue. It seems likely there's a problem either with the mix going into the cylinders (carbs fuel lines or air intake), or with timing. These can affect a bike at particular speeds and throttle positions. If using the choke has helped at some point that's a further indication (the choke changes the gas/air mix). ,,,

2000 Husaberg Fe... | Answered on Nov 10, 2008


There are usually two methods to check the oil. One is a dipstick and the other is a sight-glass. You should have one or the other somewhere on the side of the engine crankcase. It should be fairly obvious and not require the removal of any body panels. If you can't find a dipstick in the side of the crankcase you will need to get down on your hands and knees and have a look for a sight-glass instead. This will be like a tiny window with a gauge against which you can check the level.

2000 Husaberg Fe... | Answered on Nov 10, 2008


u can take the current ones off by simply heating them to warm the cement then pull...if that doesnt work u could use a razor blade but bake sure that u dont cut anything. you could put the wire around the grip if u want its all up to u.

2000 Husaberg Fe... | Answered on Nov 10, 2008


Hi, Anonymous and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
13. Faulty auto choke or wiring connection.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://husaberg.org/fuel/5956-only-runs-choke-any-hints.html
WHY your motorcycle only runs on CHOKE
https://www.repair-manuals.eu/cat/motorcycle_repair_workshop_manuals/repair_manuals_husaberg
http://www.cyclebuy.com/husaberg/parts.htm
https://www.manualslib.com/manual/813892/Husaberg-E-400-E.html#product-FC%20550/4

Husaberg... | Answered on Jun 13, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Replace+the+battery+2002+husaberg+470-fxe&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjHooyGkObiAhXqqFkKHcIWB3kQ_AUIESgC&biw=1440&bih=757
http://husaberg.org/electrical/9274-new-owner-fx-470-2002-battery-replacement-question.html
http://husaberg.org/mechanical/11215-workshop-manual.html
http://www.cyclebuy.com/husaberg/parts.htm
https://www.manualslib.com/manual/640214/Husaberg-05.html

Husaberg... | Answered on Jun 13, 2019


The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under the air filter box lid. (A spare fuse is located in the starter relay)

The fuse box containing the fuses of individual power consumers is located under the seat

Husaberg... | Answered on Feb 26, 2017


Hi, Pete and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your question please visit the website below. Good luck and have a nice day.
HUSABERG Pure Enduro Service

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Husaberg... | Answered on Nov 11, 2015


Its a long shot, but try Youtube.
They have tons of DIY videos.

Husaberg... | Answered on Jan 08, 2015


Basically the only way water can get in the oil is if there is a corrosion hole in the housing behind the pump impellor. Water pumps have only 1 seal and if that leaks water will drain from a hole in the pump housing under neath the pump.

Husaberg... | Answered on Mar 11, 2013


Casey... if you have turned your adjustment screw that much...there is no way you should have ever turned it that much...If it were me.. I would take it to a Suzuki professional and let them replace the fluid and set the adj. screws back to stock,,,you have to be a good rider to really notice a lot of difference.. and have a good sticky front tire!! Stop fooling with it!!

Motorcycles | Answered on Dec 08, 2019


What metal beams.. what are the metal beams used for Good quality powder coat last a long time... paint might..

Motorcycles | Answered on Dec 08, 2019


IF the charger is sealed you won't be able to fix it... just buy a new one...
If you do get in it.. finding the correct parts will be your problem..

Motorcycles | Answered on Dec 08, 2019


Hi, Richard for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Fuse+box+location+2005+Suzuki+Bandit+1200S&tbm=isch&source=univ&sa=X&ved=2ahUKEwj_7eD1qaTmAhWR2FkKHULmCL0QsAR6BAgJEAE&biw=1440&bih=757
https://www.youtube.com/watch?v=RZ2RrR-tbYk
https://www.manualslib.com/manual/1053286/Suzuki-2005-Gsf1200.html
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki/

Motorcycles | Answered on Dec 07, 2019

Not finding what you are looking for?
2000 Husaberg Fe 501 e SM Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Husaberg Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Strech
Strech

Level 3 Expert

1562 Answers

Are you a Husaberg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Fe 501 e SM Husaberg

  • Fe 501 e SM Husaberg

Most Popular Question

start

  • Motorcycles
Loading...