2003 Husaberg Fe 400 E - Answered Questions & Fixed issues


if nothing else you shuld have a check bolt on the side of the left or right case

2003 Husaberg Fe... | Answered on Jun 08, 2012 | 142 views


Assuming the bike runs well and this is just a kicking technique problem.
push the kick starter slowly until you get to the hard spot(TDC), pull the decomp lever, and push the kicker a little to get past top dead centre, then release decomp and give it a decent kick, should never kick back

2003 Husaberg Fe... | Answered on Apr 15, 2010 | 612 views


all it needs is fresh engine oil and run a spaner around it,,,just incase any thing is about to "drop off"

2003 Husaberg Fe... | Answered on Feb 06, 2010 | 246 views


ProClean is good stuff but not worth the money. The only reason I had it was because I won a create of it at our clubs Supercross race it's too expensive in my opinion. I buy 40 litre containers of stuff called TFR which stands for Traffic Film Remover, it basically is a detergent like ProClean, Simple Green and all the others, only it costs a fraction of the price and isn't deluted. This means you can delute it to your own strength for different causes. You can see it removing dirt as you watch, like someone said above. You can not use it pure on the bike however, it will make alloy parts go dull - as my buddy found out lol. ,,,

2003 Husaberg Fe... | Answered on Nov 10, 2008 | 113 views


Put it up on your stand lossen the axel and remove the bolt on the bottom of the shock. Then tighten your chain and lift your swingarm up until its horizontal with the ground, then the chain should have almost no play. Not completely tight, but almost no play. Tighten the axel, and the bolt on the shock, and your set,,,

2003 Husaberg Fe... | Answered on Nov 10, 2008 | 60 views


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.ultimatespecs.com/motorcycles-specs/honda/husaberg-fe-400-e-2003
http://husaberg.org/mechanical/19634-oil-level.html
https://www.emanualonline.com/Motorbikes/Husaberg/FE-Models.htm
http://www.cyclebuy.com/husaberg/parts.htm
Husaberg 400 User Manual

Husaberg Fe 400... | Answered on Jun 13, 2019 | 34 views


Hi, Barry it's nonadjustable for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.topspeed.com/motorcycles/motorcycle-reviews/husaberg/2013-husaberg-fe-350-ar148843.html
KTM 350 Valve Adjustment And Camshaft Swap
http://www.datamanagement-le-blog.com/fe350_service_manual_download.pdf
https://www.rockymountainatvmc.com/Parts-Finder/11057/2013-HUSABERG-FE-350
https://paitandacent.files.wordpress.com/2015/08/husaberg-fe-350-owners-manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Husaberg Fe 400... | Answered on Nov 25, 2017 | 54 views


Hi, Anonymous and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
13. Faulty auto choke or wiring connection.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://husaberg.org/fuel/5956-only-runs-choke-any-hints.html
WHY your motorcycle only runs on CHOKE
https://www.repair-manuals.eu/cat/motorcycle_repair_workshop_manuals/repair_manuals_husaberg
http://www.cyclebuy.com/husaberg/parts.htm
https://www.manualslib.com/manual/813892/Husaberg-E-400-E.html#product-FC%20550/4

Husaberg... | Answered on Jun 13, 2019 | 40 views


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Replace+the+battery+2002+husaberg+470-fxe&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjHooyGkObiAhXqqFkKHcIWB3kQ_AUIESgC&biw=1440&bih=757
http://husaberg.org/electrical/9274-new-owner-fx-470-2002-battery-replacement-question.html
http://husaberg.org/mechanical/11215-workshop-manual.html
http://www.cyclebuy.com/husaberg/parts.htm
https://www.manualslib.com/manual/640214/Husaberg-05.html

Husaberg... | Answered on Jun 13, 2019 | 46 views


The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under the air filter box lid. (A spare fuse is located in the starter relay)

The fuse box containing the fuses of individual power consumers is located under the seat

Husaberg... | Answered on Feb 26, 2017 | 50 views


Hi, Pete and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your question please visit the website below. Good luck and have a nice day.
HUSABERG Pure Enduro Service

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Husaberg... | Answered on Nov 11, 2015 | 66 views


Its a long shot, but try Youtube.
They have tons of DIY videos.

Husaberg... | Answered on Jan 08, 2015 | 62 views


Basically the only way water can get in the oil is if there is a corrosion hole in the housing behind the pump impellor. Water pumps have only 1 seal and if that leaks water will drain from a hole in the pump housing under neath the pump.

Husaberg... | Answered on Mar 11, 2013 | 287 views


Fuel filter dirty? This could be a problem the '85 LTD and the '86 SEI. The fuel filter for those machines are different than the rest. They are for the pressurized fuel system and are a bit expensive. Don't know if mother Honda still has them.

Motorcycles | Answered 2 days ago | 408 views


Hi, Billy you need to repost your question under the Fireplace category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 2 days ago | 16 views


USE ENGLISH OUR TRANSLATOR DIED

Motorcycles | Answered 2 days ago | 17 views


Gap for what .......

Motorcycles | Answered on Nov 30, 2019 | 18 views


Red Dog Shelters is a renowned manufacturer and supplier of portable blast shelters that can deliver you excellent performance each and every time. Their shelters are regarded as some of the best in the industry for their highly secure features.
http://www.reddogshelters.com/portable-protection-shelters.html
towdog-up-undefined-undefined-0.png

Motorcycles | Answered on Nov 30, 2019 | 20 views


Hi, Taylor you need to repost your question under the Generator category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered on Nov 29, 2019 | 15 views


Hi, Anne you need to repost your question under the Thermostat category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered on Nov 29, 2019 | 15 views

Not finding what you are looking for?
2003 Husaberg Fe 400 E Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Husaberg Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5968 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Strech
Strech

Level 3 Expert

1562 Answers

Are you a Husaberg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...