20 Most Recent 2008 Husaberg Fe 650 e Questions & Answers


Most are spray mate but I have used chainsaw oil in the past its very good easy to clean off if it flings and I just used to put it on the chain with an old paint brush.,,,

2008 Husaberg Fe... | Answered on Nov 10, 2008


Hi, Anonymous and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
13. Faulty auto choke or wiring connection.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://husaberg.org/fuel/5956-only-runs-choke-any-hints.html
WHY your motorcycle only runs on CHOKE
https://www.repair-manuals.eu/cat/motorcycle_repair_workshop_manuals/repair_manuals_husaberg
http://www.cyclebuy.com/husaberg/parts.htm
https://www.manualslib.com/manual/813892/Husaberg-E-400-E.html#product-FC%20550/4

Husaberg... | Answered on Jun 13, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Replace+the+battery+2002+husaberg+470-fxe&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjHooyGkObiAhXqqFkKHcIWB3kQ_AUIESgC&biw=1440&bih=757
http://husaberg.org/electrical/9274-new-owner-fx-470-2002-battery-replacement-question.html
http://husaberg.org/mechanical/11215-workshop-manual.html
http://www.cyclebuy.com/husaberg/parts.htm
https://www.manualslib.com/manual/640214/Husaberg-05.html

Husaberg... | Answered on Jun 13, 2019


The main fuse protects all power consumers of the vehicle. It is located in the starter relay housing under the air filter box lid. (A spare fuse is located in the starter relay)

The fuse box containing the fuses of individual power consumers is located under the seat

Husaberg... | Answered on Feb 26, 2017


Hi, Pete and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your question please visit the website below. Good luck and have a nice day.
HUSABERG Pure Enduro Service

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Husaberg... | Answered on Nov 11, 2015


Its a long shot, but try Youtube.
They have tons of DIY videos.

Husaberg... | Answered on Jan 08, 2015


Basically the only way water can get in the oil is if there is a corrosion hole in the housing behind the pump impellor. Water pumps have only 1 seal and if that leaks water will drain from a hole in the pump housing under neath the pump.

Husaberg... | Answered on Mar 11, 2013


We cannot give you diamonds or coins
Please understand that you are talking on a public forum to regular people who offer advice, not to the company that made your singing monster.

Motorcycles | Answered 3 hours ago


Hi, Bob for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
http://users.on.net/~sandr/dxdtc.htm
https://www.motorcycle-manual.com/harley-davidson-fault-codes/
http://www.mediafire.com/file/r2e0a6dx6lskpnx/2009_Harley_V-Rod_Service_manual.pdf/file
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://ownersmanuals2.com/harley-davidson/night-rod-2008-owners-manual-66572
https://www.6ya.com/ To speak to me personally $6

Motorcycles | Answered 7 hours ago


Hi, Adrian you need to repost your question under the Chana Star 1300 category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 7 hours ago


Hi, Anonymous you need to repost your question under the Chrysler PT Cruiser category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 7 hours ago


Hi, Lillian you need to repost your question under the Skidoo category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 7 hours ago


Hi, Janice you need to repost your question under the multimeter category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 7 hours ago


Hi, David and the usual suspects are:
1. Contaminated or faulty speed sensor.
2. Faulty turn signal module.
3. Corroded, broken or loose connector pins/sockets in the wire harness between the speedometer and the ECM or TSSM and the sensor.
4. The speedometer unit has failed.
5. Speedometer instrument fuse has blown.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
https://www.hdforums.com/forum/softail-models/729158-speedo-issues-with-2001-fatboy.html
http://www.mediafire.com/file/65o6mbkdq5ty8ke/99_to_05_Harley_Softail_Service_Manual.pdf/file
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://serviceinfo.harley-davidson.com/sip/service/document/6300?highlight=1998+sportster+owner
https://www.6ya.com/ To speak to me personally $6

Motorcycles | Answered 8 hours ago


Hi, Sasa you need to repost your question under the Rotoprint or printer category, not Motorcycles. Thanks, Gregg

Motorcycles | Answered 9 hours ago


Assuming you mean a Digitech GNX2 floor effects pedal, go to the Digitech site, search GNX2 and select support: Manuals

https://www.digitech.com/discontinued-products/GNX2-.html?dwvar_GNX2-_color=Grey-GLOBAL-Current&cgid=discontinued-products

The Re-Categorize link in FixYa is broken so I can't put it in a better category. If it is not a Digitech pedal, could you please Comment with the full make and model of what you are looking for.

Motorcycles | Answered 9 hours ago


Hi, Michael for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+2005+Suzuki+Katana+600&tbm=isch&source=univ&sa=X&ved=2ahUKEwjpm7D8p_zlAhUMyFkKHTUuBNIQsAR6BAgJEAE&biw=1440&bih=757
http://classiccycles.org/1852/597964.html
https://www.manualslib.com/manual/1059519/Suzuki-Gsx600f.html
https://www.partsfish.com/page/oem-parts-for-suzuki
https://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals/

Motorcycles | Answered 9 hours ago


http://office.manualsonline.com/support/texas-instruments/calculator/

Motorcycles | Answered 10 hours ago


Hi, Sam and the usual suspects are:
1. Improperly loaded motorcycle. Non-standard equipment on the front end such as heavy radio receivers extra lighting equipment or luggage tends to cause unstable handling.
2. Incorrect air suspension pressure.
3. Damaged tires or improper front-rear tire combination.
4. Irregular or peaked front tire tread wear.
5. Incorrect tire pressure.
6. The shock absorber is not functioning normally.
7. Loose wheel axle nuts. Torque to recommended specifications.
8. Excessive wheel hub bearing end play.
9. Improperly vehicle alignment.
10. Steering head bearings improperly adjusted.
11. Tire and wheel unbalanced.
12. Rims and tires are out-of-round or eccentric with the hub.
13. Rims and tires are out-of-true sideways.
14. Loose spokes.
15. Shock absorber improperly adjusted.
16. Worn engine stabilizer links.
17. Damaged rear engine isolation mounts.
18. Swing arm pivot shaft improperly tightened or assembled.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
https://www.hdforums.com/forum/sportster-models/814007-difficult-steering-at-low-speeds.html
http://www.mediafire.com/file/qt3ogjwrrrdvac1/2016_Harley_Sportster_Service_Manual_.pdf/file
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://ownersmanuals2.com/harley-davidson/iron-883-2016-owners-manual-66882
https://www.6ya.com/ To speak to me personally $6

Motorcycles | Answered 10 hours ago

Not finding what you are looking for?
2008 Husaberg Fe 650 e Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Husaberg Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5962 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Strech
Strech

Level 3 Expert

1562 Answers

Are you a Husaberg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Fe 650 e Husaberg

  • Fe 650 e Husaberg

Most Popular Question

husaberg fe 650 e chain lubricant

  • Motorcycles
Loading...