20 Most Recent 2001 Husqvarna SM 610 S Questions & Answers


Hi, Carl343 for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husqvarna, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.supermotojunkie.com/threads/sm610-valve-clearance-strange.53575/?id=53575
https://www.youtube.com/watch?v=14FiP4SWWtk
https://www.manualslib.com/manual/1089803/Husqvarna-Sm-610.html
https://www.bikebandit.com/husqvarna-motorcycle-parts
http://mybikemanuals.com/yamaha/

2001 Husqvarna... | Answered on Nov 09, 2019


Hi, Anonymous and the usual suspects are:
1. Wheels and or tires worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain is badly worn or links too tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect due to a poorly tuned engine.
7. Internal engine problem flywheels or balancers have shifted.
8. Broken frame.
9. Stabilizer links worn or loose.
10. Rubber mounts loose or worn.
11. Rear fork pivot shaft nuts loose.
12. Front engine mounting bolts loose.
13. Worn out or broken universal joint on shaft drive models.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Husky SM610 Sudden Vibration
http://www.cafehusky.com/threads/610-counterbalancer-vibrations.23472
Husqvarna Motorcycle Parts Fiche Husky Part Numbers
Husqvarna SM 610 Workshop Manual
Husqvarna TE 610E Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2001 Husqvarna... | Answered on Jul 01, 2017


Did you tried spraying starter fluid in the intake at the throttle body and checked.Is it running fine with starter fluid.Just spray stater fluid and check, how it runs.If it runs smooth then issue is with fuel getting blocked.Its clogged n the line, it has to be cleaned.Try with starter fluid and see.-------- Keep updated, thanks.Helpmech.

2001 Husqvarna... | Answered on Jun 16, 2011


I would say that the starter needs an overhaul and a clean out and relube. Be careful when lubricating the shaft, If the oil is the least bit thick or too heavily applied the pinion will hang up. For the rest, starting the bile is just a case of getting the sequence of the start right for that machine. When I got my Velocette (500 cc single) very long ago, it took me over half an hour to start the first morning, and no electric starters. Soon I was starting it first kick every time.

2001 Husqvarna... | Answered on Mar 05, 2011


New clutch plates would only take about 1 hour to do
I myself live in Manchester so am no help to you but its a very easy process and can be done at home.

2001 Husqvarna... | Answered on Jun 23, 2010


I think when you put the tank back on you caught the throttle cable.Take the tank back off and put back on watching that you don't catch or pinch the cable.

2001 Husqvarna... | Answered on Aug 29, 2009


Try raising the front of the shift pedal one or two notches on the shift shaft. Chances are because of the current height of the shift lever your shoe lifts the lever too far thus going right past neutral.

I hope this can be rated as a "FixYa" Thanks!

2001 Husqvarna... | Answered on May 26, 2009


The stud is 8mm with 1.25 thread. the torque, according to the service manual, is 19.6 to 21.6 Nm or 2.0 to 2.2 Kgm or 14.5 to 15.9 lb/ft.. It all depends on your favorite language.

Please take a moment to rate this answer. Thanks silverfernwe!

2001 Husqvarna... | Answered on Apr 28, 2009


Hi, Jshassoman for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husqvarna, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Shift+pattern+1984+Husqvarna+250+XC&tbm=isch&source=univ&sa=X&ved=2ahUKEwiLpOGF8OPlAhXutlkKHVTwD0QQsAR6BAgJEAE&biw=1440&bih=757
http://www.cafehusky.com/threads/help-what-is-the-xc-transmission-like-vs-cr.25630/
http://docs.husqvarnaoutlet.com.cdn.wavenetworks.com/repair%20manuals/1984%20-%204%20Stroke%20Engine%20Repair.pdf
https://husqvarnaoutlet.com/parts_fiche
http://mybikemanuals.com/husqvarna/

Husqvarna... | Answered on Nov 12, 2019


Hi, Anonymous the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://docs.husqvarnaoutlet.com.cdn.wavenetworks.com/repair%20manuals/1986%20-%202%20Stroke%20Engine%20Repair.pdf
https://www.husqvarnaoutlet.com/parts_fiche
http://mybikemanuals.com/husqvarna/
https://bikez.com/motorcycles/husqvarna_400_wr_1986.php
https://en.wikipedia.org/wiki/Husqvarna_Motorcycles

Husqvarna... | Answered on Nov 12, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husqvarna, despair not, for a mere zero $ you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.cafehusky.com/threads/too-much-oil-ecu-2.33527/
https://www.manualslib.com/manual/835484/Husqvarna-Wre-125-2011.html?page=207
https://www.manualslib.com/manual/835484/Husqvarna-Wre-125-2011.html#product-2011%20SMS%20125
https://www.husqvarnaoutlet.com/parts_fiche
http://mybikemanuals.com/husqvarna/

Husqvarna... | Answered on Nov 12, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husqvarna, despair not, for a mere $20 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/660946-1983-wr-430-oil-specs-i-have-questions/
http://www.cafehusky.com/threads/1982-430-wr-reading-crank-case-oil-level.28476/
https://www.repairmanual.com/product/official-1983-1985-husqvarna-motorcycles-owners-workshop-manual-husky85/ $20
http://mybikemanuals.com/husqvarna/

Husqvarna... | Answered on Nov 12, 2019


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husqvarna, despair not, for a mere $20 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/660946-1983-wr-430-oil-specs-i-have-questions/
https://advrider.com/f/threads/1982-husqvarna-430-wr-update.530924/
https://www.repairmanual.com/product/official-1983-1985-husqvarna-motorcycles-owners-workshop-manual-husky85/ $20
https://www.husqvarnaoutlet.com/parts_fiche
http://mybikemanuals.com/husqvarna/

Husqvarna... | Answered on Nov 12, 2019


Hi, Anonymous and the usual suspects are:
1. Clutch controls improperly adjusted.
2. Oil level too high in primary chaincase.
3. Primary chain badly misaligned.
4. Clutch discs warped.
5. Insufficient clutch spring tension.
6. Slave cylinder needs bleeding.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the links below. Good luck and have a nice day.
http://www.cafehusky.com/threads/txc-511-clutch-drag-fix.29646/
https://www.southbayriders.com/forums/threads/162620/
https://www.manualslib.com/manual/858721/Husqvarna-Tc449.html#product-2011%20SMR511
https://www.husqvarnaoutlet.com/parts_fiche
http://mybikemanuals.com/husqvarna/

Husqvarna... | Answered on Nov 12, 2019


Hi, Anonymous for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.husqvarnaoutlet.com/frame_engine_id_list
https://www.vinfreecheck.com/husqvarna-motorcycle-vin-check
https://www.husqvarna-motorcycles.com/us/service/service-check/
https://en.vindecoder.pl/ZKHH200AB8V015688
https://www.vincheckup.com/motorcycles/husqvarna

Husqvarna... | Answered on Nov 11, 2019


Hi, Anonymous and the usual suspects are:
1. Clutch controls improperly adjusted.
2. Insufficient clutch spring tension.
3. Friction discs or steel discs are worn or warped past specs.
4. Incorrect oil type.
5. Weaken clutch springs.
6. New wet clutch plates were not pre-soaked for 24 hours.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.cafehusky.com/threads/2011-te310-clutch-issues.22268
https://thumpertalk.com/forums/topic/1017829-hydraulic-clutch-adjustment
Husqvarna TE 250 310 2011 Workshop Manual
https://sparepartsfinder.husqvarna-motorcycles.com/
Husqvarna TE 310 450 510 210 Owner Manual

Husqvarna... | Answered on May 20, 2019


Most likely it will be the stater. And they are pricey. Coils hardly ever go bad or the only other thing that would cause a no spark problem could be the kill button. I hate to say it, but i think it will be the stater.

Husqvarna... | Answered on Apr 02, 2019

Not finding what you are looking for?
2001 Husqvarna SM 610 S Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5962 Answers

richard libby

Level 2 Expert

209 Answers

Joshua Jennings

Level 2 Expert

85 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

SM 610 S Husqvarna

  • SM 610 S Husqvarna

Most Popular Question

torque settings head bolts 1984 xc 125

  • Motorcycles
Loading...