1998 KTM Duke - Answered Questions & Fixed issues
Battery
is there anyway to bump start it or do I need to call ktm assist?i thought mine had gone this morning on my 990sm and meta plugin one. I kept on pressing the remote fob and nowt. Having read the alarm instructions (ahem) it shuts down completely after 5 days. You have to turn on the ignition and when it beeps press the remote fob. Bizarre...
Reply With Quote,
11/10/2008 4:59:10 PM •
1998 KTM Duke
•
Answered
on Nov 10, 2008
•
570 views
Have a 1999 ktm 65
Does she seam to have good compression? The standard rules apply, fuel, spark/timing, compression. If you have fuel in the chambers and you believe the spark is right, next worry is compression. How good are the rings. If she has been sitting for a time the piston / rings may still be a bit dry or maybe a bit stuck. mix a bit of gas with a bit of oil and again squirt into the cylinders, or use wd40; down the spark plug hole and spin the engine, and let it sit a bit before trying to start it. . That is about all you can do to find out what is going on. Be sure you are getting fuel into the chambers, get a syringe and spray it in past the throttle valves.
3/30/2011 11:23:38 PM •
KTM Duke...
•
Answered
on Mar 30, 2011
•
380 views
Led indicators fitted to ktm
Hi,,the flasher you got is not the right wattage,,did you change the indicater globes in the dash to led?
3/23/2011 2:54:44 AM •
KTM Duke...
•
Answered
on Mar 23, 2011
•
404 views
Got bike yesterday 105sx 2009..ran
Check kickstand interlock. Kickstand should close switch when up. Either interlock must be closed or trans in neutral for ignition to power up.
9/9/2010 10:27:24 PM •
KTM Duke...
•
Answered
on Sep 09, 2010
•
122 views
LC4 640 SMC. Why no spark?
Have you checked battery connections. Run switch in the correct position? Checked spark plug for debris? Just thinking out loud..
4/22/2021 11:51:04 PM •
KTM Motorcycles
•
Answered
on Apr 22, 2021
•
117 views
Engine bogging 2006 KTM 65 SX
my best friend's sister-in-lAw mAkes $74 every hour on the computer. She hAs been unemployed for ten months but lAst month her pAyment wAs $16505 just working on the computer for A few hours. go to this web site And reAd more go to this site home tAb for more detAil ...
www.online-3.com
12/21/2019 10:49:57 AM •
KTM Motorcycles
•
Answered
on Dec 21, 2019
•
770 views
Oil drain plug case cracked 2007 KTM 450 SXF
Drain oil. Use degreaser to clean area. Use JB Weld & allow to set up properly before adding oil.
If you’ve found this helpful, please click the green “helpful” icon. If you have 20 seconds please leave a few words as a review or recommendation! Also, follow me for more answers to everyday issues, I’m all for saving you money and making the most of your time! Thanks and have a great day!
3/14/2020 5:03:37 AM •
KTM Motorcycles
•
Answered
on Mar 14, 2020
•
224 views
I HAVE A KTM 450 EXE 2004 MODEL AND I HAD TO REPLACE MY HEAD GASKET ANWATER PUMP SEALS AND NOW IVE GOT THE TINYEST DRIP OF COOLANT DRIPPING DOWN BEHIND THE FLY WHEEL WHAT COULD BE CAUSING THIS ?
It's a bad seal of the head gasket. You need a new head gasket and to scrape every particle of debris from the cylinder head and cylinder surfaces that mate with the head gasket. Use the factory specified gasket sealing compound and do a clean job - no blobs or pools of the stuff. The head gasket should lay flat on the surface of the top of the cylinder, and you have to make this surface free of grit, leftover sealant and any other foreign matter before you put the head in place and torque it down. Start with the head bolts just finger tight and then go by the manufacturer's specs for the pattern and amount of torque to be applied. Usually it is recommended that you get to the specified torque amount in stages, going around several times and repeating the torque pattern until you get that maximum rated amount. This will prevent the seal from shifting or warping and should make the gasket seal perfectly. This is the old school method of doing this job. and I have never seen this fail to produce good results. Take your time, be clean, and you will have the results you want.
12/31/2018 9:50:20 PM •
KTM Motorcycles
•
Answered
on Dec 31, 2018
•
189 views
Not finding what you are looking for?