2002 Harley Davidson FLHTCUI Electra Glide Ultra Classic - Answered Questions & Fixed issues
RERPLACE REAR BRAKE PADS
You can download a manual cheap on this site then you will have all the info you need check it out
http://harley-davidson.service-manual-download.com
9/7/2014 12:33:08 AM •
2002 Harley...
•
Answered
on Sep 07, 2014
•
99 views
Fuse box
Under the left side panel
8/31/2014 8:56:21 AM •
2002 Harley...
•
Answered
on Aug 31, 2014
•
117 views
How to change a starter on a 2002 ultra classic harley-davidson
First step would be to diconnect the battery negitive wire.
Next would be to drain your clutch case oil as it will need to be removed to remove the bolt that is attached to the starter gear inside.
you can now disconnect the wires that are attached to the starter and remove the 2 bolts that hold the starter to the housing.
Be carefull as you tip the starter up and out noting the worm gear and spacer, this will need to be used on the new replacment starter if the starter you purchase does not have it included.
Simply reverse the order to re-install new starter. It may be a good thing to replace the housing gasket to prevent an oil leak once you are all finished.
The above is a snap shot explaination on how to acheive, replacing the starter but if you have a good understanding of how things work, it will give you the main steps to follow. You could also google for a video that can show you by sight how to do this proceedure also.
Hope that gives you what you were looking for.
Happy wrenching.
7/12/2014 4:00:11 PM •
2002 Harley...
•
Answered
on Jul 12, 2014
•
216 views
Cruse wont stay on
First thing that comes to mind, is the brake light staying on?
Sometimes the front brake light switch gums up and doesn't release, so the light stays on.
The cruise control kicks off when the brake light comes on.
3/23/2014 8:36:32 PM •
2002 Harley...
•
Answered
on Mar 23, 2014
•
189 views
Hard to start cold
this sounds like the carby air screw is not right or the idle jet is blocked ,the best way to go is take the bike to a dealer with a dyno and they will set this up great.you will find the bike will run like a new one cheers pete
3/13/2014 12:58:30 PM •
2002 Harley...
•
Answered
on Mar 13, 2014
•
163 views
Not finding what you are looking for?