Top 20
1985 Honda CBX 550 F-F2 Questions & Answers
1985honda spree good spark wont
have you checked for good compression? maybe the piston rings a shot
also make sure that the exhaust is not blocked
where are you spraying the starting fluid? into the airbox or straight into the carb
the other thing you could try is removing the plug and spraying directly into the head the quickly replacing the plug and kicking the bike if this dosnt work then the ring are deffintly broken
hope this helps
John
My son just bought a
Is the sidestand down, some bikes have a safety interlock that kills the engine when the bike is put into gear with the sidestand down.
Honda 500 TRX fa6 has PS on the dash….what does it mean ?
The Power Steering has failed. There has been a factory recall for a suddenly failing electrical steering shaft, that could cause the rider to loose control. This does not have to be your problem but anyhow either the electronics or the pump failed. Error codes or messages usually have to be erased by a simple reset procedure or disconnecting a plug, after repairs are done.
3/17/2024 5:47:57 AM •
Honda...
•
23 views • 1 helpful votes
What to torque the head on my 99 CBR 929 Honda in
For a 1999 Honda CBR929RR, the cylinder head bolt torque specifications are essential to ensure proper engine assembly and function. When tightening the cylinder head bolts, it's crucial to follow the manufacturer's recommended torque settings to prevent damage to the engine components.
For the CBR929RR, the cylinder head bolt torque specifications are typically as follows:
1. **Initial Torque:** 29 Nm (2.9 kgf-m, 22 ft-lbs)
2. **Final Torque:** 64 Nm (6.4 kgf-m, 47 ft-lbs)
It's essential to tighten the cylinder head bolts in the specified sequence and in multiple stages, gradually increasing the torque until reaching the final specified torque. The exact tightening sequence can usually be found in the service manual specific to your motorcycle model.
When torquing the head bolts, ensure you're using a reliable torque wrench calibrated in the appropriate units (Nm or ft-lbs). Always follow the tightening sequence precisely to ensure even pressure distribution across the cylinder head gasket.
Additionally, it's advisable to use new cylinder head bolts if the old ones have been previously tightened or stretched beyond their yield point. This helps maintain proper clamping force and ensures the integrity of the engine assembly.
As always, referring to the service manual or consulting a professional mechanic experienced with motorcycle engine assembly can provide additional guidance and ensure the correct torque settings are applied during the cylinder head installation process.
11/23/2023 4:53:22 PM •
Honda...
•
46 views • 0 helpful votes
2006 Honda Shadow Arrow 750 VT missing on the rear cylinder fire
. One possibility is that the spark plug or plug wire is faulty 1. Another possibility is that the carburetor needs cleaning and adjustment It could also be due to a valve adjustment issue or a bent rod.
I would recommend taking your motorcycle to a professional mechanic who can diagnose and fix the issue. If you prefer to troubleshoot it yourself, you can start by checking the spark plug and plug wire for any damage or wear and cleaning the carburetor. However, please note that working on a motorcycle engine can be dangerous and requires specialized knowledge and tools. Please take all necessary safety precautions and follow the manufacturer's instructions when working on your motorcycle.
10/22/2023 9:56:57 AM •
Honda...
•
22 views • 0 helpful votes
2007 honda shadow vt750 dies sputters on acceleration
The problem might be with the air filter, and if not there are a few other things that could be causing your Shadow engine to bog down on acceleration. This includes a dirty carburetor, carb adjustment issues, or other internal problems like damaged vacuum lines or a cracked manifold
8/27/2023 12:05:59 AM •
Honda...
•
56 views • 0 helpful votes
Just brought a Honda C102 Step Through. Does anybody know if its positive earth or negative earth. I just brought battery for it.
Question edited for clarity.
Question moved from Honda Cars.
I haven't seen one of those for 40 years!
The Braided cable goes to battery negative -
They normally have a Red Cable to the battery Positive +
And if I recall, there is an inline fuse in the positive?
Here is the cable
https://www.ebay.com/itm/NOS-OEM-Honda-Cub-50-70-C70-K1-C50-C65-M-CA102-C102-Cable-Earth-Battery-Ground-/172214475304?_ul=IN
and here
https://www.ebay.com/itm/225016392400
Service manuals x two :>D
Honda C102 Service manual
Honda 4-stroke.net
https://4-stroke.net > honda-c102 > downloads > 440-...
You can go to our downloads and grab yourself a copy! Download the Honda C102 Service Manual in the following format: pdf Service manual for Honda C102 (1.93 MB).
Service Repair Manual Honda C100, C102, C50,C70, C90
Blogger
http://myhondac100.blogspot.com > 2013/10 > servic...
Oct 21, 2013 - Service Repair Manual Honda C100, C102, C50,C70, C90.
http://www.servicerepairmanualonline.com/4449/honda-super-cub-50-c50- ...
7/22/2023 3:01:11 PM •
Honda...
•
40 views • 1 helpful votes
Not finding what you are looking for?