20 Most Recent
1994 Honda VT 600 C Shadow - Page 3 Questions & Answers
Bike shuts off when in gear
hello and welcome
it seems that you may have a faulty side stand switch. the side stand needs to be in the up position before the bike can be started off in gear. but if not the side stand contains a saftety switch that shuts the bike off when put into gear. to verify this you can check for spark when the bike is being turned over in gear with the clutch held in.
there should be two wires associated with this switch. a green, and green with white. so when the stand is up these two wires are connected, and the switch can be tested as such. thank you.
2007 Honda Shadow VT600C won't start have new battery and plugs, and coil pack, new fuel filter, velocity stack, rebuild carb, loose choke cable to the carb.
I'm sorry to hear about the trouble you're experiencing with your 2007 Honda Shadow VT600C. If you've already replaced the battery, spark plugs, coil pack, fuel filter, and performed maintenance tasks such as rebuilding the carburetor and checking the choke cable, there are a few more things you can try:
1. Fuel delivery: Check that the fuel pump is functioning properly and delivering fuel to the carburetor. Ensure that the fuel lines are clear and not clogged.
2. Ignition system: Verify that the ignition switch is in the "ON" position. Check the ignition fuse and wiring for any potential issues. Ensure that all connections are secure and clean.
3. Air intake and filter: Make sure the air filter is clean and not obstructed. Ensure that the velocity stack is installed correctly and not causing any air flow issues.
4. Compression test: Perform a compression test to check the engine's compression. Low compression could indicate a mechanical issue within the engine.
5. Starter motor: Check if the starter motor is engaging properly and turning over the engine. If the starter motor is not working, it may need to be replaced.
6. Wiring and electrical connections: Inspect all wiring and connections related to the ignition system, starter motor, and battery. Look for any loose or damaged wires that may be causing the starting issue.
If you've exhausted these troubleshooting steps and the problem persists, it may be best to consult a professional motorcycle mechanic or Honda dealership. They have the specialized knowledge and diagnostic equipment to pinpoint the exact cause of the starting problem and recommend appropriate repairs.
Please remember to exercise caution and follow proper safety procedures when working on your motorcycle.
Not finding what you are looking for?