20 Most Recent
2004 Honda Valkyrie Rune - Page 8 Questions & Answers
Honda 125sh battery goes flat after 3 days of non use .what can be draining the battery when its not in use
First get the battery load tested at any Interstate Outlet. It takes 3 minutes and is free.
If the battery is good, you need a good auto-electrician. Parasitic draw is difficult to diagnose, but you have something draining to earth.
Or your battery is just worn out and not holding the charge. Average life on a motorcycle / scooter is 4 to 5 years due to bad maintenance and bad winter storage plus vibration.
2/2/2021 8:50:28 PM •
Honda...
•
Answered
on Feb 02, 2021
Jok motor honda vario 125
Do you need a seat for Honda vario 125? Or is it an introduction to repair? You can find user help on the
honda vario 125 page of this Indonesian car website.
1/27/2021 6:19:46 AM •
Honda...
•
Answered
on Jan 27, 2021
How to reset date and time of honda crea scoopy 2006?
i have searched the web , as i'm sure you have to, and can not find anything relating to this issue, i would contact honda motorcyle dealer and either get them to do it or get a driver's manual or just live with it,sorry could'nt have been more helpful
1/25/2021 6:59:05 AM •
Honda...
•
Answered
on Jan 25, 2021
Honda Scoopy will not start
SOURCE:
scoopy
There is a fuel shutoff valve on the bottom of the tank that stops fuel flow when the engine is not running.
At a guess while the scooter was in storage the fuel evaporated from the carby and fuel lines. Now you are trying to start it again the fuel is slowly flowing down to the carby but not fast enough to fill the carby and start the engine.
You are probably close to starting if you cranked it for about 1 minute.
Three posibilities, keep cranking, keep adding fuel to the inlet to keep it kicking over until the carby gets fuel or take the vacuum line off the carby and suck on it for a while to let the fuel flow down to the carby.
Either way you should be close to it starting assuming its just the fuel shortage in the carby.
1/21/2021 7:32:51 AM •
Honda...
•
Answered
on Jan 21, 2021
CRF 450r. Why doesn't it start?
To run a petrol internal combustion engine it requires four things.
Air
Fuel
Compression
Ignition.
Which is missing ...............................
11/13/2020 5:02:57 PM •
Honda...
•
Answered
on Nov 13, 2020
Honda dream excess
<a href="https://portabledownloads.com/maxon-cinema-4d-studio-r22-with-crack/ "> Maxon Cinema 4D </a>
Maxon CINEMA 4D Studio R22 With Crack Introduces powerful new tools, opportunities, and improvements in modeling, animation, and shading. The perfect package for all 3D artists, both beginners and professionals. It has a wide range of tools and resources to quickly achieve impressive
<a href="https://windowcrack.com/pixologic-zbrush-2020-1-3-crack/
/ "> Pixologic Zbrush </a>
11/3/2020 7:17:46 AM •
Honda...
•
Answered
on Nov 03, 2020
Valve adjustment Honda Unicorn 160
A too tight tappet adjustment can do more than reduce mileage - it effectively changes the valve timing and can lead to burned valves and seats.
It is best not to prejudge such situations - it is generally believed the expansion of metals when the engine is at working temperature causes the tappet clearance to reduce. This isn't always the case when an aluminium cylinder head is used. Aluminium expands a much greater amount than steel and so working temperature can cause the valve clearances to increase.
10/30/2020 1:25:14 AM •
Honda...
•
Answered
on Oct 30, 2020
Not finding what you are looking for?