20 Most Recent 2005 Honda CG 150 Titan ESD Questions & Answers


bro' kumusta,

madaming pwedeng posibilidad yan, poor compression, poor spark, poor combustion. Check mo muna yung carburador niya.. dapat ang ikot ng fuel-air mixture e 2.5 turns out. Tanggalin mo yung air box at linisan yung filter nito.. tro mo din patagbuhin panandalian na walang air filter.. kasi pwede barado na ang intake nito. Check mo spark plug at siguraduhing malinis pa ito. Panigurado e palitan mo nalang ng bago.. check mo din na dumadaloy na maayos yung fuel papunta carburador.

kung ayaw mga to, pa-compression check mo para masuri ito ng maigi baka kasi maluwag na yung piston rings or piston nito.

sana nakatulong,

parate naman kung sakaling natulungan ka nito
salamat

2005 Honda CG... | Answered on Nov 14, 2019


where I can get manual for tmx 155 honda

2005 Honda CG... | Answered on Mar 12, 2018


Hi, Jouarievilla for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Honda Motorcycle Wiring Diagrams
2005 Honda CG 150 Titan ESD wiring diagram Google Search
http://die-kleinkraftrad-ig.de/wissensdatenbank/reparaturanleitungcg125.pdf
https://www.partsfish.com/page/oem-parts-for-honda
Honda CG150 Titan ES Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Honda CG... | Answered on Oct 31, 2017


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Honda TMX155 wiring diagram Google Search
Honda Motorcycle Wiring Diagrams
Honda CG150 Titan ES Owner Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda TMX 155 2013 service manual DOWNLOAD FREE FULLMANUALS COM

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Honda CG... | Answered on Oct 25, 2017


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Tmx 155 wiring diagram Google Search
Honda Motorcycle Wiring Diagrams
Honda TMX 155 2013 service manual DOWNLOAD FREE FULLMANUALS COM
http://www.partsfish.com/page/oem-parts-for-honda
http://mybikemanuals.com/honda

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Honda CG... | Answered on Oct 18, 2017


Kumusta, Anonymous ang sagot sa tanong na ito ay mas mataas sa aking grado para sa sitwasyong ito, ako ay tatawagan o bisitahin ang aking lokal na dealer o kagawaran ng kagawaran / kagawaran ng kagalang-galang na tindahan at magtanong tungkol sa anumang posibleng mabilis na pag-aayos, mga sagot, o mga pagtatanong sa bahagi. Good luck at magkaroon ng isang kahanga-hangang araw.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2005 Honda CG... | Answered on Sep 25, 2017


Hi, Venzgalutera before testing any electrical component in the Charging System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Battery Test:
The battery needs to be a fully charged and load tested to ensure proper readings, connections need to be clean and tight. If you are not working with a fully charged and functional battery, all other voltage tests will be incorrect. Standing battery Voltage should be 12.5-13.2 DCV.
2. Charging System Voltage Test:
Start motorcycle, measure DC volts across the battery terminals you should have a reading of approximately 13.2-15 DC Volts.
3. Connections and wires:
Inspect the regulator stator plug, and check the battery terminals for connection corrosion. If everything seems to be in order, move on to number 4 below to determine if there's a failed component.
4. Stator Checks/Rotor Check: Each of the following tests isolates the Stator & Rotor. If AC output and resistance test fail and stator test passes then the rotor is at fault (Pull Primary covers and inspect rotor for damage).
5. AC Output Check:
Unplug the regulator plug from the stator start motorcycle and change Voltmeter to AC volts. Probe both stator wires with your meter lead. The motorcycle should be putting out approximately 18-20 ACV per 1,000 rpm. Reading will vary depending on system, check service manual specification
Generic Specs:
22 amp system produces about 19-26 VAC per 1,000 rpm
32 amp system produces about 16-20 VAC per 1,000 rpm
45 amp system produces about 19-26 VAC per 1,000 rpm
Stator Resistance Check:
Switch your multimeter to Ohm x 1 scale. Probe each stator wires with meter leads and check resistance on the meter.
Resistance should be in the range of 0.1-0.5 Ohms. Reading will vary depending on the system, check the service manual for specifications.
Generic Specs:
22 amp system produces about 0.2 to 0.4 ohms
32 amp system produces about 0.1 to 0.2 ohms
45 amp system produces about 0.1 to 0.2 ohms
5. Stator Ground Check:
Switch your multimeter to Ohm x 1 scale.
Probe each stator wire with your positive lead on the multimeter and the negative to ground.
There should be no continuity to ground on either wire.
If there is continuity your stator is shorted to ground and must be replaced.
6. Regulator Test:
Each of the following tests isolates the regulator only, so if any of these tests fail, the regulator is at fault.
Identifying Wires:
Battery Charge Lead- Wire going from the regulator to battery positive.
AC output leads- Wires coming from the Stator to the regulator.
Ground- Wire from Regulator to ground or regulator may be grounded via the physical bolting to chassis.
Regulator Ground Test: Ensure the regulator body is grounded or grounding wire is fastened tightly to a good ground (you should verify this by checking continuity from the regulator body to chassis ground).
Fwd/Reverse Bias Test/Diode Test:
This check is testing the Diode function to ensure it is regulating the AC current for the stator into DC Current.
Switch multimeter to Diode Scale.
Place your Multimeter positive lead on each AC output wire.
Place your multimeter negative lead on the battery Charge wire.
The meter should read voltage typically around .5 volts.
Next, switch your multimeter leads putting the negative lead on the AC output wires and the Positive lead on the Battery Charge Wire. The reading should be Infinite. With your meter on the same setting, place your multimeter positive lead on the regulator ground wire or to the regulator directly, and then place your meter negative lead on the AC output leads.
The meter should read voltage typically around .5 volts.
Next, switch your multimeter leads putting the negative lead on the regulator ground and the Positive lead on the AC output wires. The reading should be Infinite.
Note: Below is a table to show the readings:
Positive Lead Negative Lead Reading
AC output 1 Battery charge lead Voltage
AC output 2 Battery Charge Lead Voltage
Battery charge lead AC output 1 ?
Battery charge lead AC output 2 ?
Ground AC output 1 Voltage
Ground AC output 2 Voltage
AC output 1 Ground ?
AC output 2 Ground ?
For more information about your issue and valuable "FREE" downloads for viewing or printing that you will need please click on the blue links below. Good luck and have a wonderful day.
http://racetechelectric.com/files/pdf/rte_troubleshooting_flow_chart.pdf
How to test your motorbike battery with multimeter multimeter tutorial
manual motor honda cg titan 125 pdf Honda Motor Vehicle Manufacturers
http://www.partsfish.com/page/oem-parts-for-honda
Honda CG150 Titan ES Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2005 Honda CG... | Answered on Aug 14, 2017


use ure chalk my friend, try it every morning, chalk in d carburator

2005 Honda CG... | Answered on Oct 18, 2014


Maybe the wire of lights are connect with starting wires.
Or you can change some parts.

Stator/Generator manufacture http://www.tztrmp.com

2005 Honda CG... | Answered on Dec 15, 2013


All of this has to happen at the proper time ... if you have good spark, fuel and air at the proper time, it has to run. Check time.

2005 Honda CG... | Answered on Aug 30, 2013


1. carb tuning air/fuel mixture
2. sobra sa langis dapat 1 litre lang
3. blow by ka na , halo na langis sa combustion chamber

2005 Honda CG... | Answered on Aug 29, 2013


good day Sir, try to check the timing off the magnito and check the fuse i hope it will help you.

2005 Honda CG... | Answered on Jun 16, 2013


see d right side of ure, cover

2005 Honda CG... | Answered on Dec 23, 2012


Have you looked on ebay?

2005 Honda CG... | Answered on Feb 03, 2011


low compression

2005 Honda CG... | Answered on Nov 22, 2010


The stator or the voltage regulator is bad. more likely it is the Voltage Regulator.

2005 Honda CG... | Answered on Jul 12, 2010


about a quart ... fill until the oil is at the proper level on the dip stick - no more and no less.

2005 Honda CG... | Answered on Apr 14, 2010


hi,generally speaking there are no other components that regulate the voltage from the generator,first thing i would do though is start the bike,and check the voltage across the battery,if the voltage is more than about 14.8-15.0v then the regulator is suspect,another way to check is put the voltmeter across the battery and get its reading at idle,then slowly lift the rpm up to about 3000-3500 rpm,the reading shouldnt change by about more than 1-1.5 volts across the rev range,if it does then the regulater is faulty..hope this helps...cheers

2005 Honda CG... | Answered on Mar 06, 2010


Sounds like you have etiher a fuel issue or a vaccum leak. return it to the dealer

2005 Honda CG... | Answered on Sep 01, 2009

Not finding what you are looking for?
2005 Honda CG 150 Titan ESD Logo

35 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

richard libby

Level 2 Expert

209 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

CG 150 Titan ESD Honda

  • CG 150 Titan ESD Honda

Most Popular Question

tmx 155 honda wiring diagram manual

  • Motorcycles
Loading...