Top 20
2008 Husqvarna SM 125 S Questions & Answers
No power 2008 Husqvarna SM 125 S
Probably your carb jets are dirty. Try cleaning it using compressor. You can change your fuel filter too and replace it with a new one.
Paint protection
the 3M protective film works really well, I have it on the nose of my GTI. It will add some sheen, but I highly reccomend it
Ecu light
Try disconnecting the battery, leave for a couple of minutes, the reconnect. If this does not work take it to a dealer to be checked.
2006 Husqvarna TE-610 only has intermittent spark one.
If you have already replaced the flywheel, stator, and CDI, the next step would be to check the ignition coil and spark plug. It is possible that the ignition coil is faulty and needs to be replaced. Check the spark plug for any damage or wear and replace it if necessary. Additionally, make sure all the wiring connections are secure and free of corrosion.
If none of these steps fix the issue, it may be best to take the bike to a mechanic or dealer for further diagnosis. They may be able to identify any other potential problems that could be causing the intermittent spark issue.
2/25/2023 3:12:22 AM •
Husqvarna...
•
854 views • 1 helpful votes
K970 won't start after rebuild
My first thought is that is the primer bulb in the right way round as effectively, it is a one way valve New bulbs also fail to work properly. I reckon that is why they come in packs of 10 :>D Take it off, connect it to fuel and make sure it pumps.
Also please note that we are not Husqvarna, we just have the category for easy filing.
11/29/2021 9:27:59 PM •
Husqvarna...
•
222 views • 0 helpful votes
Not finding what you are looking for?