20 Most Recent 1997 Suzuki VZ 800 Marauder - Page 8 Questions & Answers

Hi, it sounds like you would need to update your shift-related gears. If the car can start, then your starter, battery and alternator are fine. You might have to get your tire axels checked as well as an issue with those can also affect movement of your vehicle. Thank you.

https://www.carlsalter.com/suzuki-service-manuals.asp -------------------https://www.repairmanual.com/product/official-1987-2008-suzuki-vs1400-intruder-volusia-boulevard-s83-factory-service-manual-99500-39159-03e/

Question edited for clarity. Looks like it will https://www.google.com/search?q=2004+Suzuki+RMZ250+2007+forks+on+2004 ..

change candle, and regulate the carburetor. the excessive gasoline in coming damage the candles.

The best size and type hose to use is the same as what was used in the radiator. Your local auto parts store will have it. If you need more help with this, let me know. Good luck. ... 1992 Suzuki VS 800 Intruder The best size and type hose to use is the same as what was used in the radiator. Your local auto parts store will have it. If you need more help with this, let me know. Good luck. ...I am having a problem with coolant leaking out of the overflow. I have checked the radiator, water pump and hoses. No leaks there. I have 2 theories. First theory is the head gasket. I have not checked that. The other is the thermostat. When the coolant is cold the overflow is almost empty. When it gets hot the overflow is full. I have replaced the coolant and the overflow is full again. Any ideas?More than likely the thermostat is not opening up, when the coolant gets hot and the engine is running, the thermostat should open and the coolant should flow from the radiator to the motor and back, causing the overflow to empty out, now when it gets ... 1995

Question edited for clarity, 'want', changed to 'won't'. Who put the gas in the oil? How do you know there is gas in the oil? The two systems don't meet unless you have an injector pumping raw gas into the cylinder bore? https://www.google.com/search?q=2006+suzuki+burgman+won%27t+start ..

your motor is fi check the fuel filter tank and check the sparkplug

Hi, The problem might be with your alternator, battery and or engine. Sounds like you're losing power at most speeds. Please ask autozone tech to scan your vehicle (free) for error codes and use those error codes to guide which car parts you will replace. Thank you.

possible cause worn drive shaft rear wheel hub rubbers look at your drive shaft rubbers located in the rear wheel hub if the rubber is worn it could make it shunt forward as the rubbers engage with the alloy locators if left can also damage your rear hub

You're looking for about 120-150 psi. It'll run on as low as 90.

It seems it is Chinese with a Suzuki badge on it. https://www.google.com/search?q=carburetor+for+a+Suzuki+ES4000+generator ..

Thanks for your question.please see this video

remove air filters and try to start it.

I would say that it is an internal problem with the starter.

Making follow-ups as a new post doesn't work on Fixya as this post has no context to the previous one. Click 'Comment' under Larry's reply to you. That way Larry will get a notification that you need further help. https://www.fixya.com/motorcycles/t29892322-drz_400ms_starts_fine_but_when_put_in ..

find your model/serial number off the unit. Google search will do the rest

Have you checked the actual fuel pipes for flow ? You might need a carb refurbish kit. Weak vacuum causes similar type problems.

Did you take your carbs off to clean....and didn't take a pic for referencing the hose paths. Well good luck...all the diagrams on the inter webs are vague as f@$#. I suggest taking it to your buddy Dave's....maybe he can figure it out. Good luck mr.

TS100(letter)_ last digit leater told. 100cc old name dual sport bike street /trail. (sold mine in 1974) 2cycle engine, oil + gas, like a hedge trimmer. no year told 1973 to 1981 sorry cant guess it. well buy the shop manual. ? I did for all cars and motor cycles owned .just buy it and read and not do it wrong,ask web persons blind./ i get 100s of hits googling the cheap manual the first time used, it saved you 4 times shop labor using, SO IS FREE. (ROI of instant) https://www.repairmanual.com/product/1980-1981-official-suzuki-ts100-factory-service-manual-r-sr-2551-e-03/ some had CDI , ignition I guess you never notices the slots on the base plate. gap set first then timing is last at the 3 slotted mounts see x3 there are 3 slots best is leave those alone , lacking a timing light ! TOOL Ignition Points gap should be 0.35mm (0.014) (rumor, sorry not buying you book for you) that is the MAG /POINTS base plate, special tool to get flywheel off. and not wreck it.

2017we have no such scooter in USA< Burgman 200 , 400, 650 yesthe Burgman is named Skywave in only JapanSo go to the Japan Suzuki dealer and ask for the manual..bingo