2002 Suzuki GZ 125 Marauder - Page 5 - Answered Questions & Fixed issues
Need to know how to install a ignition switch for my 2000 gz250 Suzuki Marauder
1. Start by disconnecting the negative battery cable from the battery.
2. Remove the screws that hold the ignition switch in place and then remove the switch from its mounting bracket.
3. Disconnect the wiring harness from the back of the ignition switch and then remove it completely from the motorcycle.
4. Install the new ignition switch in its mounting bracket, making sure to line up all of the screw holes with those on the bracket.
5. Securely tighten all of the screws to ensure a tight fit.
6. Reconnect all of the wiring harnesses to their respective terminals on the back of the ignition switch, making sure that each wire is connected to its correct terminal and that all connections are secure and tight.
7. Re-connect the negative battery cable to its terminal on the battery and test out your new ignition switch to make sure it is working properly before you take your motorcycle out for a ride!
2/14/2023 12:12:18 AM •
Suzuki...
•
Answered
on Feb 14, 2023
•
128 views
Suzuki Burgman 125cc 21 plate
If you are having difficulty moving your Suzuki Burgman 125cc scooter backwards, there could be several reasons for this, including mechanical issues or problems with the scooter's weight distribution. Here are a few things you can try to diagnose and fix the problem:
- Check the weight distribution: If the weight is not distributed evenly on the scooter, it can make it difficult to move it backwards. Try adjusting the position of the scooter or shifting your own weight to see if this helps.
- Check the brakes: If the brakes are engaged or not properly adjusted, it can make it difficult to move the scooter backwards. Check the brake lever and make sure it is released, and try adjusting the brake cables to see if this helps.
- Check the wheels: If the wheels are not properly aligned or there is damage to the tires, it can also make it difficult to move the scooter backwards. Check the wheels for damage or wear, and have them aligned if necessary.
- Check the engine and transmission: If there is an issue with the engine or transmission, it can affect the scooter's ability to move backwards. Have a mechanic inspect the engine and transmission to make sure everything is working properly.
If none of these solutions solve the problem, it's possible that there may be a more complex issue with the scooter. In that case, it's best to take it to a certified mechanic for a professional diagnosis and repair.
2/11/2023 6:32:35 AM •
Suzuki...
•
Answered
on Feb 11, 2023
•
54 views
Wiring diagram for a 2000 model Suzuki quadrunner
limited info generic answer this is service manual for 250 if not the one do onlinr search and include all info on atv --------------http://www.crservice.dk/Suzuki%20ATV/LTF250/LT-F250_01E.pdf
2/10/2023 1:48:53 PM •
Suzuki...
•
Answered
on Feb 10, 2023
•
61 views
Suzuki Bandit 400 1992 model Cdi no spark on spark plugs
check and test battery --cdi---connections kill switch and safety switches this is service manual it will assist in troubleshooting problem -------https://www.manualslib.com/manual/1183991/Suzuki-Gsf-400-Bandit.html-
1/31/2023 3:41:04 PM •
Suzuki...
•
Answered
on Jan 31, 2023
•
87 views
Spark plug gap for 2010 Suzuki 49cc moped
The spark plug gap for a 2010 Suzuki 49cc moped should be 0.6-0.7mm or 0.024-0.028 inches.
It's important to consult your owner's manual or service manual for the specific gap recommended by the manufacturer, as different models and years may have different requirements. It's also a good idea to check the gap of your spark plug when you install it as they can sometimes be out of spec.
1/23/2023 9:16:21 PM •
Suzuki...
•
Answered
on Jan 23, 2023
•
606 views
My 2007 King Quad 450 Suzuki will not start with the green start button but I can use the pull rope and it will start and run fine. what is the cause?
It sounds like there may be an issue with the starter circuit on your 2007 Suzuki King Quad 450. The fact that the bike will start and run fine when using the pull rope, but not when using the green start button, suggests that there is a problem with the connection between the button and the starter motor.
Possible causes for this issue include a faulty starter button, a broken or corroded starter relay, or a problem with the starter motor itself. Additionally, there may be an issue with the wiring or connections in the starter circuit that is preventing power from reaching the starter motor when the button is pressed.
It's recommended to check the wiring connections and fuses, and ensure they are all secure and not corroded. And also check the starter relay, it might be malfunctioning and preventing power from reaching the starter motor when the button is pressed. If the problem persists, it's best to take it to a professional mechanic to diagnose and fix the issue.
1/23/2023 10:16:47 AM •
Suzuki...
•
Answered
on Jan 23, 2023
•
100 views
Hi, how much oil goes in the forks of 1982 suzuki gs 750 t
The amount of oil that goes in the forks of a 1982 Suzuki GS 750T will depend on the type of forks that are installed on the motorcycle. It is important to use the correct amount of oil to ensure that the forks are functioning properly.
If your Suzuki GS 750T has standard telescopic forks, you will need to add 10.8 ounces (320 mL) of fork oil to each fork. If your motorcycle has air-assisted forks, you will need to consult the owner's manual to determine the correct amount of oil to use.
To add oil to the forks, you will need to remove the fork caps and use a fork oil level gauge or a piece of wire to measure the amount of oil in the forks. If the oil level is too low, add oil until the forks are filled to the correct level. If the oil level is too high, remove excess oil until the forks are at the correct level.
I hope this information helps! Let me know if you have any other questions.
1/6/2023 2:06:06 PM •
Suzuki...
•
Answered
on Jan 06, 2023
•
178 views
Where can I download a Suzuki s83 1400 repair manual
https://www.carlsalter.com/suzuki-service-manuals.asp -------------------https://www.repairmanual.com/product/official-1987-2008-suzuki-vs1400-intruder-volusia-boulevard-s83-factory-service-manual-99500-39159-03e/
11/20/2022 3:33:18 PM •
Suzuki...
•
Answered
on Nov 20, 2022
•
92 views
Not finding what you are looking for?