20 Most Recent 2007 Suzuki Boulevard Questions & Answers


The clutch is not adjustable. It is a wet clutch and is operated with hydraulic pressure.

2007 Suzuki... | Answered on May 18, 2018


ON WHAT, IF YOU DONT ASK THE RIGHT QUESTION NO ONE WILL HAVE THE ANSWER??

2007 Suzuki... | Answered on Oct 26, 2017


what suzuki?? be more helpful

2007 Suzuki... | Answered on Oct 26, 2017


Hey Juan,
remove the spark plugs.. spray a little FLAMMABLE WD -40 into the holes... reinstall the spark plugs and start the bike..if it starts.. take it to a qualified professional... tell him what you did.. he will fix it...if it does not start,,make sure you have reconnected ALL the wires to the battery and check ALL your fuses.....if nothing wrong is found...take it to a qualified professional.

2007 Suzuki... | Answered on Aug 16, 2017


take it off an see if there is a screw or nut inside holding it

2007 Suzuki... | Answered on May 05, 2017


Hi Richard, I am sorry you can't find the first and best tool you ever bought for your Suzuki but despair not for a mere $15.00 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
2007 Suzuki Motorcycle Service Repair Workshop Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Suzuki... | Answered on Oct 03, 2015


Hi Barbara, I would do an ohms check on your ignition coil, for more information about your question please visit the website below. Good luck and have a nice day.
2007 Suzuki Motorcycle Service Repair Workshop Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2007 Suzuki... | Answered on Sep 28, 2015


Remove the handlebar clamp so the bars are loose, you should be able to fit the throttle.

2007 Suzuki... | Answered on Aug 26, 2015


Hi Thomas put the bike in a high gear and turn the back wheel to make sure the motor is turning over. If it is try booster cables. If that don't work follow the plus cable to the starter solonide and cross the two heavy cables with a screwdriver if the starter is still not working you will need a starter. Regards Jim...

2007 Suzuki... | Answered on Jun 01, 2015


You have the clutch protection overide switch, on the clutch lever, wired up to the start button.
Check your wiring.

2007 Suzuki... | Answered on Jun 26, 2014


Hi Lew,
You can check that on this video below. Hope it helps.
how to test starter Ask com Web Search

2007 Suzuki... | Answered on Jun 26, 2014


1st unhook the neg.cable.2nd remove the cover plate.3rd remove the starter cable from starter,4th it may take a little pressure to move starter backward while lifting up on the starter---bingo.

2007 Suzuki... | Answered on Jun 13, 2014


any lights? either starter motor brushes or regulator rectifier, no lights? then you`re in trouble (other than the battery obviously)

2007 Suzuki... | Answered on Feb 25, 2014


It could be voltage regulator

2007 Suzuki... | Answered on Dec 10, 2013


just make sure it's tight, and was blue loc tight on it as well it help protect it from the atmosphere. the put torqu spec more for gasket-ed surfaces, holes with tapered openings and people that use cheater bars on 8 mm bolts. I use a 3/8 impact to just run it tight, a stong hand one a 1/2 racket will be fine. A old mech i worked with a very smart wise man told me this once " they make a wrench the size they do is so you wont use a cheater bar to over tighten it, save your torque wrench for when you need it" those words have stuck in my head since i was 10 yrs olds and i have watched guys snap bolts because they dont use the right tool.
I hope this helps if there is anything else i can help please feel free to contact me.
M.Woodring

2007 Suzuki... | Answered on Nov 21, 2013


11_8_2013_10_02_03_pm.jpg
Get yourself a pickup tool like this one from your local auto parts store (I recommend NAPA) and it should slide inside and grip the nut. If you can find one like above with a magnet on the end, that might also work.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jim_f0a87ad0fe99f4ab

2007 Suzuki... | Answered on Nov 08, 2013


suzuki has been known for rattles, so what you can do is get your
allen wrenchs out and start working from the handle bars down .
If you look you will see every cover that has been put on by allen
screws. Also the top of the heads are fake crome tops and they
will rattle . you will really have to work at one piece at a time and
then ride . with patients you will find what you are hunting. It wont
be anything lower then the motor, it will be higher up.

2007 Suzuki... | Answered on Jul 19, 2013


Hello jess, I found a forum that discuss about hot to take the gas tank off and how to put it back. Kindly visit this forum and read their discussions.


-
Dunlop Motorcycle Tires has the quality and integrity of tires.

2007 Suzuki... | Answered on Mar 19, 2013


Typically, there is a ring that screws onto the front of the switch which mounts to the holder from the back. Remove the ring, the switch falls out. I dont know if yours is "typical", however.

Better yet, take your serial number to your Suzuki dealer, ahd he or she can cut you a key based on that number. For that matter, so to can a good locksmith. No need to remove the switch.

2007 Suzuki... | Answered on Dec 19, 2012

Not finding what you are looking for?
2007 Suzuki Boulevard Logo

135 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Boulevard Suzuki

  • Boulevard Suzuki

Most Popular Question

bike start

  • Motorcycles
Loading...