20 Most Recent
2008 Suzuki GSX 1400 FE Questions & Answers
MY MMS
How to activate MMS.There are 2 steps there:- Contact your operator and check if you have MMS enabled. If not, ask the prices and enable it.-
Then you have to make the settings that your mobile needs. Easiest way
is to give your operator the information on the phone model/type you
have and ask him to send you an automated message that sets the
configuration in your phone automatically.Then you can send/see MMS pictures.
Fuel tank....
89-92 750/1100 tanks are interchangable, 93-95 750 tanks will work but the rear tail mounts mont be there...same for the 93-98 1100
How to check oil on my bike
There are usually two methods to check the oil. One is a dipstick and the other is a sight-glass. You should have one or the other somewhere on the side of the engine crankcase. It should be fairly obvious and not require the removal of any body panels. If you can't find a dipstick in the side of the crankcase you will need to get down on your hands and knees and have a look for a sight-glass instead. This will be like a tiny window with a gauge against which you can check the level.
T-clocs
tires, control, lights, oil, chassis, stands
Hi i have clicking noise
hi; check the thickness of the brake pads. If you allow them to go right
down to the metal your brake disc will be damaged resulting in an unnecessary
and expensive replacement. Fitting braided steel brake lines will increase
the performance of your brakes by roughly 50%.
also check brake fluid reservoirs if its in good level or no leaks.
try to go to this site..
http://www.totalmotorcycle.com/maintenance/brakes.htm
Indicator relay
easiest way to find the relay is turn the indicators on and listen for where the clicking sound is comming from youll soon find it this way.hope this helps
Where is the rectifier located on my 2004 suzuki katana 600
Behind the radiator on the left side. It is the device with cooling fins, even though the electronic parts are embedded in rubber paste.The location isn't ideal and sudden defects leave people stranded so what people do is relocate the regulator/rectifier to a cooler place. Perhaps to the air inlet, under the air filter. Follow the three, mostly, yellow cables that originate from the stator when you don't find it behind the radiator.
3/24/2024 3:09:20 AM •
Suzuki...
•
Answered
on Mar 24, 2024
Why my Suzuki TF 125 losses power in the midway? What are the causes for such loss of power?
What do you mean by "Midway"? How old is this motorbike? What exactly did you do to clean the carburettor? Is it a new spark plug and a new, clean air filter? Did you empty the fuel tank to remove the fuel tap to clean the filter on the inside of the tap?
Is it doing anything else? Things like - is it hard to start, has heavier exhaust smoke or it has a rough and uneven idle.
2/18/2024 5:20:58 PM •
Suzuki...
•
Answered
on Feb 18, 2024
Bypass immobilizer on 2007 Suzuki R6
You can't, the computerized system is in place to stop exactly what you are trying to do, Steal the bike without the correct credentials. You can't reprogram or over-ride the computer. You need a bike electrician.
12/20/2023 3:33:40 AM •
Suzuki...
•
Answered
on Dec 20, 2023
Where is air/fuel screw on a suzuki vs 800 intruder
The air/fuel mixture screw on a Suzuki VS800 Intruder is typically located on the carburetor. To adjust the air/fuel mixture, you'll need to locate the carburetor and look for a small screw that can be turned.
Keep in mind that the exact location of the screw may vary slightly depending on the model year and specific carburetor version on your VS800 Intruder. Generally, it is located on the bottom or side of the carburetor.
Here are the general steps to locate and adjust the air/fuel mixture screw:
1. Locate the Carburetor: The carburetor is usually positioned on the side or underside of the engine. Follow the intake manifold or air filter housing to find the carburetor.
2. Identify the Air/Fuel Screw: Look for a small screw on the carburetor. This screw is typically flat-headed and may be recessed. It is often located near the bottom of the carburetor.
3.Adjustment: With the engine running at idle, use a screwdriver to turn the air/fuel mixture screw. Turning it clockwise (in) usually leans out the mixture, while turning it counterclockwise (out) enriches the mixture.
4. Listen to the Engine: As you make adjustments, listen to the engine's sound. The goal is to find the point where the engine runs smoothly and the idle is stable.
5. Fine-Tune: Make small adjustments and give the engine a moment to respond before making further changes. It's a process of trial and error to find the optimal setting.
6. Check the Owner's Manual: Refer to your motorcycle's owner's manual for specific guidance on the location and adjustment of the air/fuel mixture screw. The manual will provide information tailored to your bike's make and model.
If you're uncomfortable making these adjustments yourself or if you're unsure about the location of the screw, it's advisable to consult a professional mechanic or refer to the specific service manual for your Suzuki VS800 Intruder.
11/14/2023 2:14:48 PM •
Suzuki...
•
Answered
on Nov 14, 2023
Not finding what you are looking for?