20 Most Recent 2001 Yamaha FJR 1300 Questions & Answers

Yeah, I'd say your front wheel is out of balance, might have thrown a wheel weight. Or somebody put some flat repair in there and it gobbed up in one spot. Get the wheel balanced, high speed, and if it still wobbles, get a steering damper on there. I had one om my monster when I bought it , but didn't really need it, so I took it off,. Hope this helps.

you need to be more specific with with the problem....what are the symptoms?

this is the best way of starting your bike yes not the only, pull your clutch in and you can start it as will, if not your clutch switch is bad. If you have any other questions feel free to ask
M.Woodring

Wheel needs balanced anytime you replace tire. Wheel could also be bent, but not as likely.

Does it remain between 3 and 4 all the time not higher? If yes, then you can say it is normal as long it remain about half way distance between "c" and "h" indicators. Good enough?

Hi! Maybe or maybe not. If you feel like the bike is fine and runs fine but having doubts regarding the engine temp, I suggest that you replace the temp sending unit of the bike. Atleast for your own peace of mind. Hope this helps and have a good one!

Hi again and welcome back to FixYa,

I can understand the difficulty, the Service Manual is 18.9Mb, a bit big. I compressed the file but it will only go down to 15.2Mb. Please click here to download the rar file.

Should you need just the wiring diagram, 3 sheets here, here and here.

Incidentally, have you tried right clicking on the Service Manual link and clicking on "Save Link As" rather than opening it on a browser?

Again, good luck and thank you for asking FixYa.

Hi and welcome to FixYa,

Perhaps a full service manual would be better?

Good luck and thank you for asking FixYa.

First of all... the FJR has a hydraulic clutch so there is no cable to adjust. Secondly don't listen to any of these people telling you to tear into the case. The FJR has an adjustable clutch lever. Setting 5 is closest to the grip (less throw) setting 1 is furthest away (more throw). See where yours is set and adjust accordingly

2007. Error code 12 is the crankshaft position sensor.25 M

Your kick-stand switch is stuck in the off mode. Try cleaning it because they get real dirty from the chain, road grime, and rain.

If the ABS light is on you will need to get the whole braking system checked AS SOON AS POSSIBLE. Faulty brakes on a motorcycle mean it should NOT be used until it is repaired. For your electrics check the fuses as that is the most common, (and cheapest), reason for them not working.