My, 2008 kawasaki ninja 250, gas tank won't open. When I insert the key, it won't turn. I've pushed and fidgeted it as much as possible to the point before breaking the key in it. I've spray WD40 in it and even waited few hours for it to settle, and no difference. I have tried using a back up key that has NOT been worn down and it still won't turn. Any help would be appreciated

SOURCE: Remove the tail

The assembly is bolted on. Depending on how much you want to modify it, there are fender eliminator kits available. Some are just license plate holders. Others are complete rear turn signal and bracket kits. Some have lights for the license plates, some do not. Do a search on the web. If you just don't like how the tail hangs down so low, consider just cutting the it off at the bottom, right below the plate to make it shorter. The reflector isn't necessary to have.

SOURCE: 2001 kawasaki ninja 250 - headlight will not work-

Is the headlight itself new? You can hook up any 12 volt source to the headlight prongs and tell if the bulb itself is burned out...take it out and test it !...good luck to you....Tim

SOURCE: how to remove front fairing 250 kawasaki ninja

there are small allen bolts or lock screws.. take them out and it should just come off

SOURCE: I have a 2010 Kawasaki Ninja 250 and looking at

The exhaust is about all you can do and a K&N air filter. Those 250's are tweek pretty much to the limit from the factory.

SOURCE: Lost my key for my 2008 kawasaki ninja 250. No Key

1. Tell your dealer your Chassis No. for key replacement in their file
2. Try your local locksmith to make a duplicate
3. Replace the whole ignition key cylinder.
Good luck