Question about 2004 Honda VT 1100 C Shadow Spirit
Hi, David_rebeka and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Dies when put it in gear 2003 Honda Spirit VT 750
Put the bike in gear and engines dies
Honda shadow vt1100 Owners Workshop Manual
Honda VT1100C2 Owner Manual Page 3
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Jul 10, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The most likely cause of your problem is electrical wiring shorting out underneath your left side cover. Pull the cover and check all the wiring, especially noting the condition the potting sealant (usually silicone) that should be sealing the wires going into the connectors, Ensure that none of the wiring is exposed. Check the tightness of all connectors. Check all visible component integrity, too. That should solve your problem.
Posted on Jul 07, 2009
Hi and welcome to FixYa,
Offhand, it would appear that the charging circuitry has failed. Initially, check the rectifier/regulator combo and its connectors/terminals. The regulator is located behind and below the coolant reservoir. Check for any loose, burned or corroded terminals:
Good luck and thank you for asking FixYa.
Posted on Aug 03, 2009
SOURCE: stator removal honda
There is a tool that is used, it looks like a steering wheel puller or flywheel puller. Loosen the nut, a strap tool is handing to hold the stator still while you loosen the nut. Then using the removal tool, you pull this off. reassemble by tighting the nut. You should be able to get a puller at autozone in the loan a tool program. I hope this helps
Posted on Aug 07, 2009
Tips for a great answer:
Apr 18, 2018 | 2005 Honda VT 750 DC Shadow Spirit
Aug 15, 2016 | 2004 Honda VT 1100 C Shadow Spirit
Dec 05, 2015 | 2000 Honda VT 1100 C Shadow Spirit
Aug 25, 2014 | 2004 Honda VT 1100 C2 Shadow Sabre
Jul 05, 2014 | 2005 Honda Shadow Spirit 750
Apr 18, 2013 | 2002 Honda VT 1100 C Shadow Spirit
Mar 29, 2013 | 2001 Honda VT 1100 C Shadow Spirit
May 14, 2012 | 1995 Honda VT 1100 C Shadow Spirit
Jul 07, 2009 | 2004 Honda VT 1100 C Shadow Spirit
Mar 18, 2009 | 2005 Honda VT 1100 C Shadow Spirit
80 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: