Question about 2003 Husaberg Fe 501 E

1 Answer

Cam timing 1998 Husaberg Fe 501

Set timing on 1998 husaberg 501 FC ignition to cam @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Husaberg Master
  • 59,368 Answers

Hi, Mike for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://husaberg.org/mechanical/21559-1989-2004-timing-chain-cam-gear.html
https://www.youtube.com/watch?v=q-gn8S3ydFs
http://www.keustermans.nl/Husaberg_FE600_99_repair_manual.pdf
http://www.cyclebuy.com/husaberg/parts.htm
https://www.manualslib.com/manual/1088074/Husaberg-Enduro-Fe-400.html#product-FE%20501%20e

Posted on Jun 13, 2019

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Colin

  • 1584 Answers

SOURCE: Would like to know the spark plug gap for my 2002

Cant go wrong with 30" inch

Posted on Jan 03, 2010

Testimonial: "Thanks for the response on a Sunday afternoon."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2013 Husaberg 350 Enduro how to adjust the timing


Hi, Barry it's nonadjustable for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.topspeed.com/motorcycles/motorcycle-reviews/husaberg/2013-husaberg-fe-350-ar148843.html
KTM 350 Valve Adjustment And Camshaft Swap
http://www.datamanagement-le-blog.com/fe350_service_manual_download.pdf
https://www.rockymountainatvmc.com/Parts-Finder/11057/2013-HUSABERG-FE-350
https://paitandacent.files.wordpress.com/2015/08/husaberg-fe-350-owners-manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Feb 07, 2015 | Husaberg Fe 400 E Motorcycles

1 Answer

2003 Husaberg Fe 650 e no spark


Hi, Lance and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Faulty run/off switch
11. Tilt sensor needs a reset.
12. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2003 FS 650 No spark Husaberg Forum
husaberg what they don want you to know
HUSABERG FE 450 Repair Manual
http://www.husaberg.no/Teknisk%20data%20Husaberg/Delekataloger/Firetakt/2000-2008/2003parts.pdf
Husaberg 400 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 06, 2018 | 2003 Husaberg Fe 650 e

1 Answer

1998 Husaberg FE400E hard to start


Hi, Anonymous and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery damaged or nearly discharged, should have 12.5 volts.
4. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or fuel line closed off, restricting fuel flow.
10. Choke valve inoperative.
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Starting problem Husaberg FE400 03
2003 fe400e starting problems
http://www.husaberg.no/Teknisk%20data%20Husaberg/Verkstedhandboker/RA_Husaberg_2005_E_05.pdf
Husaberg Parts Dirt Bike Motocross
Husaberg 400 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 15, 2017 | 2000 Husaberg Fe 400

1 Answer

After replacing the head gasket how do i get the chain to reach around the cam sprocket . I just need to go one more tooth and the tensioner is removed


Hi mate I am Yamaha man myself but thought this may help I get this question often for YZ yamahaa if your cam is installed you will never get the chain over it on - YZ at least, you need to place chain over cam sprocket at same time as installing the cam before cam is locked in (and even that is very tight fit) especially if brand new cam chain is being fitted as well cheers mate not sure this helps but it sounded familiar good luck

May 23, 2011 | 2000 Husaberg Fe 501

1 Answer

I was fitting a after market tail light the other nite and had the engine running as to have power to identife wich wire did what (testing with a multi meter) and the engine stoped as if it was switched...


Hi, Jonti16 and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and CDI box.
5. Spark plug cables shorting or leaking, spark plug cable connections loose, check for spark leakage in the dark.
6. Faulty ignition coil, pick up coil, trigger coil or CDI box testing needs to be checked with an ohmmeter at 70 degrees Fahrenheit
7. Faulty safety switches clutch, kickstand, neutral, off/on etc.
8. Faulty ignition switch.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
No spark AGAIN
husaberg what they don want you to know
HUSABERG FE 450 Repair Manual
http://dirtypart.com/manuals/filer/Husaberg/Husaberg%20Repmanual%20-05.pdf
http://dirtypart.com/manuals/filer/Husaberg/Husaberg%202001-2002%20SPARE%20PARTS%20MANUAL.pdf
Husaberg 400 User Manual
HUSABERG FE 450 EU Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 16, 2017 | 2002 Husaberg Fe 501 E

1 Answer

Needing to find out how to set timming and get a workshop manual


Go to www.husaberg.com
Select "service", then "downloads", and look for your year, and the type of information you need.

Oct 12, 2010 | 2000 Husaberg Fe 501 e SM

3 Answers

Husaberg (FE 501-03)Stator problem


I have never heard of a stator preventing a motorcycle from starting. You need a professional, local, second opinion before you plunk down any bucks.

Unless that is, are you calling a magneto a stator? Does your motorcycle have a battery? If it has a battery, you probably do not have a magneto.

Dec 29, 2009 | 2003 Husaberg Fe 501 E

Not finding what you are looking for?
2003 Husaberg Fe 501 E Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husaberg Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5962 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Strech
Strech

Level 3 Expert

1562 Answers

Are you a Husaberg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...