After changing the oil and filter, reset the monitor by proceeding as follows:
Turn ignition On, but do not start engine.
Fully depress and release accelerator pedal three times within five seconds.
If CHANGE ENGINE OIL lamp flashes for five seconds, this indicates system has reset.
Start engine. OIL LIFE should change to 100%.
If CHANGE OIL SOON lamp lights again, repeat reset procedure.
2001-08 Silverado, w/Driver Information Center
Turn ignition On, but do not start engine.
Press MODE button until DIC (Driver Information Center) reads OIL LIFE LEFT/HOLD SET TO RESET.
Press and hold SET button until 100 percent is displayed. You will hear 3 chimes and CHANGE ENGINE OIL SOON message will go off.
Turn ignition Of
how to reset oil life on 2004 chevy silverado
×