Need to set mixture scew on carb
SOURCE: settings needed for mixture screws
Turn both screws inward and seat them GENTLY. Now turn both screws one and one half turns outward. This is the factory setting.
Please rate this solution as a "FixYa" Thanks!
SOURCE: i have a dt 125 field bike will not kick start
try squirting some fuel on the inlet and see if it firse get back to me with results
Testimonial: "will give it a go tried for hour today "
SOURCE: Need to know the mixture settings on the carb, 04
From a LIGHTLY seated position, turn both adjusting screws outward one and one half turns. This is the stock setting.
SOURCE: what is the air fuel mixture srew setting for a
Generally there is no specific setting, however nearly all carby's default setting is one and a half turns out. Whatever "air" you are running the bike in will determine optimum setting for this. Altitude, humidity, fuel type, sparkplug range all play a small part in this. Trial and incremental settings is the only way without diagnostic bench testing equipment. Cheers.
2,093 views
Usually answered in minutes!
×