My 1982 yamaha SR185 battles to start. what is the valve clearances on this machine? thanks
SOURCE: valve clearances
Hi Anne
The cold valve lash for your bike are intake 0.08-0.12mm and exhaust 0.10-0.14mm. You can get this and more specifications for your machine for free here.
regards
robotek
SOURCE: glowing exhaust header yamaha wr250f
It won't be valve timing or clearance. The fuel/air mix would be the culprit. Clean the carburetor with special attention to the idle circuit. Remount the carb with new manifold gaskets. A manifold air leak will mess up the mixture. Also, get a new spark plug one heat range colder than stock. Hope this helps out!
Please rate this solution. Thanks!
SOURCE: What are the valve clearances of the engine of
Valve clearances are
in 0,12 mm
ex 0,15 mm
on cold engine
SOURCE: 2007 YZ450F - What is the valve clearance?
See the diagram below. Cold, the intake sets at .004 to .006 The exhaust sets at .008 to .010
SOURCE: what is valve clearance for a 250 yamaha timberwolf
what an *******. If I had a manual or my library had one I wouldnt be asking the question. If I need help fixing something dont tell me to go jump in a lake just dont answer
687 views
Usually answered in minutes!
×