Clutch pedal feels like no pedal and won't shift
The clutch on this vehicle is hydraulicly operated and usually what happens is either the system develops a small leak and loses fluid or the seals inside the master or slave cylinder fail and won't allow enough pressure to build up to release the clutch. Start by checking the clutch master cylinder reservoir fluid level [located under the hood on the drivers side of the firewall] to make sure it is full. It holds only a few ounces of fluid so even a tiny leak will quickly deplete it. You could also have a clutch disc or pressure plate that has failed or fallen apart which would also give you the same symptoms.
after it is bled it loses pressure again and has to be pumped up again
×