SOURCE: how to remove a stator pully for a 2003 yamaha r1
HEY BUD, THERE IS ONLY ONE WAY TO PULL THE STATOR ALL BIKE COMPANIES MAKE A PULLER JUST FOR THIS PURPOSE. YOU SHOULD INVEST IN ONE THEY ONLY COST 20 TO 30 DOLLARS AND IS A LOT CHEAPER THEN THE STATOR IF TRIED ANY OTHER WAY
Testimonial: "thank you do u know where i can get that tool "
SOURCE: i have a error code 39 on my 2007 yamaha
open circuit detected on a primary injector,check plug for corrosion and make sure put back on well
SOURCE: paint code r1 02 silver
the paint code is 0791 its called silver #3(S3) ColorRite top 5175-2
Hope this helps
SOURCE: I have a yamaha r1 and it's showing error code 12?
The error code 12 on your bike is a crankshaft position sensor malfunction. Just means you should replace that sensor.
SOURCE: Yamaha R1 2007 error code 36
Error Code #36 IS faulty ignition
> "Open cicuit detected in the primary lead of ignition coil #4."
Probable causes are:
-open or short cicuit in wiring harness.
-malfunction in ignition coil.
-malfunction in ecu
-malfunction in component of ignition cut-off circuit system.
Hope this helps
906 views
Usually answered in minutes!
×