I have a 2007 R6s, I recently had the oil changed to synthetic and spark plus replaced. When in idle or when I first turn the bike on, the tachometer bounces between 1 and 2k rpm, at times it bounces a few times and shuts off, it runs fine, but when coming to a slow down or stop sometimes shuts off too. Do you know what may be causing this problem?
SOURCE: engine stalls
my friend had one that did the same and he replaced throttle positioning sensor and it fixed it. but when you put a new battery in them they wont idle until you hold at steady low rpm for almost a minute because it has to relearn its position. so check your voltage meter and make sure it is around 13-14 volts when running and not on 12 while running because it could be too low of voltage for it and would be the same principle as disconnecting the battery because it takes 12 volts to keep computer on. hope I wasnt too confusing but I just want you to check your voltage for free before you buy electrical parts.
SOURCE: Won't run
There are to many things that can cause the no start. Here is a link that can help you understand the possible problems and links to how to retrieve the DTC codes which is activating your Auto Shutdown relay.
Good luck and hope this helps. Keep me posted
http://www.allpar.com/fix/stall.html
SOURCE: Engine cuts out with clutch engaged.
is your bjke water cooled could have aproblem with that-its gettin hot-if air cooled carb may neede cleaning. the clutch is ok but indicates to me that that carb needs a low speed jet adjust also-do u have a clymer manual!!
557 views
Usually answered in minutes!
×