- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your starter doing nothing after clicking sound, this is telling us the starter is not work. Please check your starter :
1. Voltage input ( it should 12 VDC).If there is power 12 VDC but your engine is not crank/ spin, go check #2 below 2. Check your starter ( its carbon brush==> you may need to clean), starter winding ( check the impedance / resistance ( It should about 0.04 Ohm==> if the value is too far you may use OEM starter and is not the genuine one).
3. If none of above work, kindly return your starter for replacement.
Sounds to me like the starter motor is jamming, the clicking is the solenoid working so thats ok. Remove the starter motor and connect direct to a battery but be carefull as if it does run it will jump out of your hand so best to clamp it to a bench. If it is ok its probably the sprag clutch thats jammed. Good luck
Bad hot wire, bad cround or bad starter. Use jumper cables to jump from battery directly to the starter. If it doesn't turn over the starter has a problem. If it does, than you have eather a bad ground or hot lead going to the starter. Use a DC volt meter or a test light to see if its got power coming from the starter button. Do all that and you'll know the answer.
normally starter relay located behind the left or right hand side cover,if the electrical system is dead then there is a fairly good chance battery is no good
You should have paid a little more money and got a Kaw; suki; hon. yam. you should have gotten somthing bran name; you got a throw away bike. The wirring system is messed up and there might not be no replacment parts .Your wirring system needs to be reworked.
×